Specifying The Match Parameters - Cisco Nexus 5600 Series Configuration Manual
Nx-os system management
Hide thumbs
Also See for Nexus 5600 Series:
- Hardware installation manual (100 pages) ,
- Reference (480 pages)
Table of Contents
Advertisement
Configuring NetFlow
• IPv6 source and IPv6 destination addresses
• IPv6 flow label
• IPv6 options
• TOS field
• Layer 4 protocol
• Layer 4 source and destination ports
The following match keys are provided for Layer 2 NetFlow:
• MAC source and destination addresses
• Ethertype
• VLAN
Specifying the Match Parameters
You must configure at least one of the following match parameters for flow records:
Command
match ip {protocol | tos}
Example:
switch(config-flow-record)# match ip protocol
match ipv4 {destination address | source address}
Example:
switch(config-flow-record)# match ipv4 destination
address
match ipv6 {destination address | source address |
flow-label | opitons }
Example:
switch(config-flow-record)# match ipv6 flow label
match transport {destination-port | source-port}
Example:
switch(config-flow-record)# match transport
destination-port
OL-31641-01
Cisco Nexus 5600 Series NX-OS System Management Configuration Guide, Release 7.x
Specifying the Match Parameters
Purpose
Specifies the IP protocol or ToS fields as keys
Note
The match transport
destination-port and the match ip
protocol commands are required to
export Layer 4 port data.
Specifies the IPv4 source or destination
address as a key.
Specifies the IPv6 key.
Specifies the transport source or destination
port as a key.
The match transport
Note
destination-port and the match ip
protocol commands are required to
export Layer 4 port data.
263
- Quick Links:
- Table of Contents
Hide quick links:
Advertisement
Table of Contents
