Including A Bordering Pim Dense Mode Region In Msdp - Cisco Catalyst 3850 series Configuration Manual
Ip multicast routing configuration guide
Hide thumbs
Also See for Catalyst 3850 series:
- Configuration manual (58 pages) ,
- Hardware installation manual (146 pages)
Table of Contents
Advertisement
Configuring MSDP
Command or Action
Step 2
configure terminal
Example:
Device# configure terminal
Step 3
ip msdp filter-sa-request {peer-address | peer-name}
[list access-list]
Example:
Device(config)# ip msdp filter sa-request
172.31.2.2 list 1
Step 4
Repeat Step 3 to configure SA request filters for additional
MSDP peers.
Step 5
exit
Example:
Device(config)# exit
Including a Bordering PIM Dense Mode Region in MSDP
Perform this optional task to configure a border device to send SA messages for sources active in a PIM dense
mode (PIM-DM) region.
You can have a device that borders a PIM-SM region and a PIM-DM region. By default, sources in the
PIM-DM domain are not included in MSDP. You can configure this border device to send SA messages for
sources active in the PIM-DM domain. If you do so, it is very important to also configure the ip msdp
redistribute command to control what local sources from the PIM-DM domain are advertised. Not configuring
this command can result in the (S, G) state remaining long after a source in the PIM-DM domain has stopped
sending. For configuration information, see the
Sources, on page 221
SUMMARY STEPS
1. enable
2. configure terminal
3. ip msdp border sa-address type number
4. exit
OL-32598-01
section.
IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3.6E (Catalyst 3850 Switches)
Including a Bordering PIM Dense Mode Region in MSDP
Purpose
Enters global configuration mode.
Enables a filter for outgoing SA request messages.
Note
Only one SA request filter can be configured
per MSDP peer.
--
Exits global configuration mode and returns to
privileged EXEC mode.
Controlling SA Messages Originated by an RP for Local
227
- Quick Links:
- Prerequisites for Using the Web Gui
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
