Removing A Memory Module - Dell EMC PowerEdge T440 Installation And Service Manual
Hide thumbs
Also See for EMC PowerEdge T440:
- Installation and service manual (115 pages) ,
- Simple operation manual (9 pages) ,
- Manual (150 pages)
Table of Contents
Advertisement
Table 35. Memory population
DIMM Type
DIMMs Populated/
Channel
RDIMM
1
2
LRDIMM
1
2
Removing a memory module
Prerequisites
1
Follow the safety guidelines listed in
2
Follow the procedure listed in
3
Remove the air shroud.
WARNING:
Allow the memory modules to cool after you power off the system. Handle the memory modules by the card edges
and avoid touching the components or metallic contacts on the memory module.
CAUTION:
To ensure proper system cooling, memory module blanks must be installed in any memory socket that is not occupied.
Remove memory module blanks only if you intend to install memory modules in those sockets.
Steps
1
Locate the appropriate memory module socket.
CAUTION:
Handle each memory module only by the card edges, ensuring not to touch the middle of the memory
module or metallic contacts.
2
Push the ejectors outward on both ends of the memory module socket to release the memory module from the socket.
3
Lift and remove the memory module from the system.
Figure 55. Removing a memory module
Next steps
1
Install the memory module.
2
If you are removing the memory module permanently, install a memory module blank. The procedure to install a memory module blank
is similar to that of the memory module.
106
Dell EMC PowerEdge T440 Installation and Service Manual
Installing and removing system components
Voltage
1.2 V
1.2 V
Safety
instructions.
Before working inside your
Operating Frequency (in
MT/s)
2666, 2400, 2133, 1866
2666, 2400, 2133, 1866
2666, 2400, 2133, 1866
2666, 2400, 2133, 1866
system.
Maximum DIMM Rank/Channel
Dual rank or single rank
Dual rank or single rank
Quad rank
Quad rank
- Quick Links:
- Status Led Indicators
- Status Led Indicators
Hide quick links:
Advertisement
Table of Contents
