Ethernet Devices - Cisco IR829 Hardware Installation Manual
Integrated services router
Hide thumbs
Also See for IR829:
- Product manual (16 pages) ,
- Hardware installation manual (56 pages) ,
- Hardware installation manual (69 pages)
Table of Contents
Advertisement
Chapter 2
Installing the Router
Ethernet Devices
Identify the Ethernet devices that you will connect to the router: hub, servers, and workstations or PCs.
Ensure that each device has a network interface card (NIC) for connecting to Ethernet ports.
If you plan to configure the software using Cisco IOS commands through the console port, provide an
ASCII terminal or a PC that is running terminal emulation software to connect to the console port.
Installing the Router
This section describes how to install the Cisco IR829. This router can be installed on a table top or other
flat horizontal surface mounted on a wall or DIN rail.
The recommended clearance when horizontally mounted is 1.5 inches on both sides for floor mount
bracket clearance and 2 inches on top. Top clearance is not required but stacking heat-dissipating objects
on top of the router is not allowed. I/O side clearance is needed as it is required to access the cable
connections. Clearance is not required on the backside (opposite side from I/O face) unless DIN rail
mounting is required. Clearance is required to attach and mount the DIN rail bracket. The same
clearances apply when mounted vertically.
This section also describes how to attach external antennas to the routers and contains the following
topics:
•
•
•
•
•
Warnings
This equipment needs to be grounded. Use a green and yellow 12 to 14 AWG ground wire to connect
Warning
the host to earth ground during normal use. Statement 242
Accessing the SIM Cards
This section describes how to install and/or replace a SIM card. Ensure that the router is not mounted to
a wall, floor, or DIN rail.
Do not touch any part of the exposed PCB circuit area when the SIM cover is removed.
Caution
The covers are an integral part of the safety design of the product. Do not operate the unit without the
Warning
covers installed. Statement 1077
Warnings, page 2-3
Accessing the SIM Cards, page 2-3
Installing Antennas, page 2-5
Mounting on a Wall, Table, or Other Flat Surface, page 2-5
Installing the Router Ground Connection, page 2-7
Cisco IR829 Integrated Services Router Hardware Installation Guide
Installing the Router
2-3
- Quick Links:
- Table of Contents
- Installation and Upgrade
Hide quick links:
Advertisement
Table of Contents
