Connecting Dc Power - Cisco IR829 Hardware Installation Manual

Integrated services router

Hide thumbs Also See for IR829:

Product manual (16 pages)

Hardware installation manual (56 pages)

Hardware installation manual (69 pages)

Table Of Contents

Table of Contents

Use at least a 4 mm

Caution

The ground lug is supplied with the device.

To ground the router to earth ground by using the ground screw, follow these steps:

Step 1

Locate the ground lug in the packaging kit. Store the ground screw for later use.

Step 2

Use a wire stripping tool to strip the 14-16 AWG (2.08-1.31mm²) grounding wire to 0.22 in. (5.56 mm).

Step 3

Insert the ground wire into the ring terminal lug, and using a crimping

tool, crimp the terminal to the wire.

Step 4

Slide the ground screw through the ground lug.

Step 5

Insert the ground screw into one of the two screw positions shown in the

graphic.

Step 6

Use a ratcheting torque screwdriver to tighten the ground screw and ring terminal to the router side panel to 3.5 in-lb

(0.4 N-m). The torque should not exceed 3.5 in-lb (0.4 N-m).

Step 7

Attach the other end of the ground wire to a grounded bare metal surface, such as a ground bus, a grounded DIN

rail, or a grounded bare rack.