Cisco IR829 Hardware Installation Manual page 44

Integrated services router

Hide thumbs Also See for IR829:

Table of Contents

Installing the Router

Figure 2-3

Step 2

Install the router to a wall stud using two number-10 wood screws, round- or pan-head, with number-10

washers or two number-10 washer-head screws. The screws must be long enough to penetrate at least 1.0

inch (25.4 mm) into the supporting wood or metal wall stud. (See

Figure 2-4

For hollow-wall mounting, each bracket requires two wall anchors with washers. Wall anchors and

Note

washers must be size number 10.

Route the cables so that they do not put a strain on the connectors or mounting hardware. Cables should

Step 3

be routed down relative to the router to prevent water from traveling on the cables.

Cisco IR829 Integrated Services Router Hardware Installation Guide

2-6

Cisco IR829 Mounting Holes

Mounted to wall

Chapter 2

Installing the Router

Figure

2-4.)

Table of Contents

Show Quick Links

Table of Contents