Prerequisites; Guidelines And Limitations; Default Settings; Installation And Upgrade - Cisco IR829 Hardware Installation Manual
Integrated services router
Hide thumbs
Also See for IR829:
- Product manual (16 pages) ,
- Hardware installation manual (56 pages) ,
- Hardware installation manual (69 pages)
Table of Contents
Advertisement
Prerequisites
Figure 5-1
In this example, number 1 is the interface being used on the router and number 2 is the interface on the
Linux OS. For the Cisco IR829, 1 is Gigabit Ethernet 5 and 2 is Eth 0.
Prerequisites
•
Guidelines and Limitations
•
•
Default Settings
The bundled Linux Guest OS:
•
•
Installation and Upgrade
By default, IR829s ship with a software bundle that includes the latest versions of all of the required
images such as Cisco IOS, Guest OS, and Hypervisor.
Use the following procedure to upgrade your router to the latest software bundle. It can take several
minutes for the router to upgrade and install all of the images (Hypervisor, Cisco IOS, and Guest OS).
DETAILED STEPS
Copy the bundle image to the IR829 IOS flash partition using scp or sftp.
Step 1
Example bundle name: ir800-universalk9-bundle.SPA.<VERSION>
Enter the following commands at the IR829 prompt:
Step 2
Cisco IR829 Integrated Services Router
5-2
Connectivity Between Cisco IOS and Guest OS
Router must be running Cisco IOS.
The bundled Guest OS is based on Linux kernel version 3.8.11.
You must configure Cisco IOS to provide Guest OS Connectivity.
uses DHCP to acquire the IP address.
does not have a default root password.
Chapter 5
Guest Operating System (Guest OS) Installation and Configuration
- Quick Links:
- Table of Contents
- Installation and Upgrade
Hide quick links:
Advertisement
Table of Contents
