Connecting To The Router Gateway Ports; Connecting To The Usb Port - Cisco IR829 Hardware Installation Manual

Integrated services router

Hide thumbs Also See for IR829:

Table of Contents

Step 3

Using the pins included in the kit, crimp each pin onto a wire.

Step 4

Insert the pins into the power connector, referring to previous figures 1

and 2 for guidance.

Step 5

Plug the connector into the power entry receptacle.

Connecting to the Router Gateway Ports

For hazardous location environments, follow these warnings when connecting to the destination ports

(antenna, serial, Ethernet, and console ports).

Warning

If you connect or disconnect the console cable with power applied to the switch or any device on the

network, an electrical arc can occur. This could cause an explosion in hazardous location

installations. Be sure that power is removed or the area is nonhazardous before proceeding.

Statement 1080

Warning

Do not connect or disconnect cables to the ports while power is applied to the switch or any device

on the network because an electrical arc can occur. This could cause an explosion in hazardous

location installations. Be sure that power is removed from the switch and cannot be accidentally be

turned on, or verify that the area is nonhazardous before proceeding.

Statement 1070

If you are connecting to the USB port:

Note

- a connection (to the USB port) can only be made in a non-hazardous environment

- the USB port cover must be reinstalled before the router can be deployed in a hazardous environment

Getting started with the Cisco 829 Integrated Services Router

78-100611-01A0

Table of Contents

Show Quick Links

Table of Contents