Related Manuals for Huawei B932 series
Summary of Contents for Huawei B932 series
- Page 1 Wonderful Communication, Mobile Life. Welcome to HUAWEI B932/933 Series Wireless Gateway HUAWEI B932/933 Series Wireless Gateway User Guide...
- Page 2 No part of this manual may be reproduced or Co., Ltd., Bantian, Longgang District, Shenzhen, transmitted in any form or by any means without P. R. China prior written consent of Huawei Technologies Postal Code: 518129 Co., Ltd. Website: http://www.huawei.com...
-
Page 3: Safety Precautions
Safety Precautions Read the safety precautions carefully to ensure the Do not attempt to disassemble your correct and safe use of your wireless device. For device or its accessories. Only qualified detailed information, see "Warnings and personnel are allowed to service or Precautions."... - Page 4 Observe the laws or regulations on device use. Respect others’ privacy and legal rights when using your device.
-
Page 5: Table Of Contents
Table of Contents Table of Contents 1 Firewall Switch ......... 16 LAN MAC Filter ........16 Quick Start 1 LAN IP Filter..........17 Appearance ..........1 Virtual Server ........... 17 Installation ..........1 DMZ Settings ........... 19 Power On/Off the Device......3 UPnP Settings.......... 19 Viewing the Running Status .....3 Remote Management ...... -
Page 7: Table Of Contents
Quick Start The supported functions and displayed Before inserting or removing the SIM card, you Note appearance are subject to your product must disconnect the device from the power purchased. Pictures posted for illustration adapter. Warning purpose only. Please refer to the product for actual appearance. - Page 8 Installation Step 3: Connect to a PC Step 5: Connect the External Antenna (Optional) If the indicator of the Ethernet interface connecting Connect the external antenna cable with the antenna with a network cable is on, the connection is jack on the main unit. Screw the antenna to make successful.
-
Page 9: Power On/Off The Device
Power On/Off the Device Viewing the Running Status To avoid electrical devices from interfering by the wireless signal, place electrical devices one meter away from the device. Warning Indicator Status Power Steady on and in yellow, the device is The device can be placed horizontally on a table, switched on successfully. -
Page 10: Make A Call
Make a Call If you need to configure the other device-related Indicator Status parameters, you need to access the device Mode • Double blinking in green: searching the management page (http://192.168.1.1). For details, network; please read on. • Blinking in green: registering with the 2G network;... -
Page 11: Using The Management
Using the Management Page Item Description Log in to the Management Page Basic Status Displays the parameter configuration status of the device. Quick Setup Quickly configures the device. Start the Internet browser and enter the address http://192.168.1.1 in the address bar. Connection Displays the network connection status and connects to the network. -
Page 12: Access The Internet
Access the Internet • The SIM/UIM card is supplied by the Item Description service provider. For details, contact WCDMA your service provider. The WCDMA The WCDMA • When the Save PIN Code check box is network is available. network is unavailable. selected, the Auto validation of PIN code is enabled. -
Page 13: View Configuration Information
View Configuration Information provider (ISP). The dial-up number is used to initiate View Configuration Information the network call; the PPP user name and PPP password is used to obtain the service authorization On the configuration page, you can view the current provided by the ISP. -
Page 14: Validating Quick Setup
Validating Quick Setup Validating Quick Setup The last page of the wizard displays all the settings you have configured. • To accept the settings, click Finish. • To change the settings, click Back. • To quit the settings, click Cancel. -
Page 15: Configuring Your Computer
Configuring Your Computer This takes the Windows XP operating system (OS) In the Internet Protocol (TCP/IP) Properties as an example to describe how to configure your dialog box, select Obtain an IP address computer. For other OSs, the configurations may be automatically and Obtain DNS server address different and you need to configure them as required. -
Page 16: Advanced Settings
Advanced Settings Overview System Management On the System page, you can change the password, Click Advanced Settings, you can configure both the upgrade the software, restore the factory defaults, basic attributes and advanced parameters of the restart the device, and view the version information. device, and also perform routine maintenance and management to the device. -
Page 17: Sim/Uim Settings
Warning Click Reboot. • The software programs for upgrading must come from the official website of Huawei or Viewing the Version Information the official website of the carrier. • Upgrading the software does not change the configuration of the client. -
Page 18: Mobile Network Settings
Mobile Network Settings Enabling or Disabling the PIN Code Auto Validating PIN Code You can enable or disable the auto validate PIN code Click function. Select Enable/Disable in the PIN Code Click Operation list box. Select Enable/Disable in the Auto Validate option Enter the correct PIN code. -
Page 19: Dial-Up Settings
Dial-up Settings • Auto: The device automatically searches the Select the preference of connection mode in the network and registers with it. Preferred Mode list box. • Manual: You need to manually search the network and register with it. • If the carrier provides only the 2G service and 说明... -
Page 20: Dhcp Settings
DHCP Settings • PPP Connection: Select the dial-up connection Click Save. mode. • PPP Authentication: The service is provided by Changing a Profile ◆ your ISP. For details, consult your ISP. • PPP Max Idle Time: The duration of the PPP Select a profile to be changed in the Profile List connection is in idle. - Page 21 DHCP Settings the network devices. If you are using the DHCP • The Start IP Address must be smaller than or server, you need to do the configurations on the PC 说明 equal to the End IP Address. connecting with the device. For details, see •...
-
Page 22: Security Settings (Optional)
Security Settings (Optional) Click Security, you can configure the advanced LAN MAC Filter security settings. Your device supports MAC filtering based on a list of either denied or allowed computers. A common Firewall Switch method to restrict network access is to specify the Your device has a true firewall that controls the Media Access Control (MAC) address. -
Page 23: Lan Ip Filter
LAN IP Filter Click Ok. LAN IP Filter Deleting an IP Address You can configure the device to block specific IP address so that they cannot be accessed from computers in the local network. Click in the Modification column. The corresponding IP address filter is deleted. Click to access the LAN IP Filter page. - Page 24 Virtual Server Enter the IP Address. Click to access the Virtual Server page. Click Ok. Adding a Virtual Server Changing a Virtual Server Select the protocol and status. Click in the Modification column. The Enter values in the following text boxes: relevant virtual server is displayed.
-
Page 25: Dmz Settings
DMZ Settings Click Ok. Only one computer can be specified as a DMZ 说明 host at a time. Click Apply. UPnP Settings DMZ Settings The Universal Plug and Play (UPnP) service allows If your PC cannot run network applications through other network users to control your device’... - Page 26 Remote Management When you are on a trip, you can maintain your device through the remote web management service. It also allows your ISP to help you solve the device problems from a remote location. Click Select Enabled or Disabled for Remote Status to enable or disable the service.
-
Page 27: Troubleshooting
Troubleshooting What to do if a PC in the LAN cannot access the You must configure the correct PPP user name Internet? and PPP password when you access the Internet through the device. Check whether they The power indicator is on, and the device is are correct, and see "Configuring PPP Profile normally connected with the power adapter. - Page 28 management page when the PC obtains the IP For the DWORD value of DefaultRcvWindow, do address automatically. the same operations as that of TcpWindowSize. When the signal strength is normal, what to do if the downloading rate is low? In this case, you need to set the value in the registry as follows: Choose Start >...
-
Page 29: Warnings And Precautions
Warnings and Precautions • Secure the wireless device on its holder. Do not place Electronic Device the wireless device on the seat or other places where it can get loose in a sudden stop or collision. • Turn off your device near high-precision electronic •... -
Page 30: Children Safety
Children Safety malfunction of the products, fire, or explosion may not touch the wireless device with a wet hand. occur. Otherwise, short-circuit and malfunction of the product or electric shock may occur. • Do not place sharp metal objects such as pins near the earpiece. - Page 31 Cleaning and Maintenance accessories with a piece of soft antistatic cloth that is a little wet. • Do not scratch the shell of the wireless device. Otherwise, the shed coating may cause skin allergy. Once it happens, stop using the wireless device at once and go to see a doctor.
-
Page 32: Abbreviations
Abbreviations The Third Generation WLAN Wireless Local Area Network Access Point WCDMA Wideband CDMA Access Point Name WI-FI Wireless Fidelity CDMA Code Division Multiple Access DHCP Dynamic Host Configuration Protocol Domain Name Server EDGE Enhanced Data rates for GSM Evolution Global System for Mobile communications GPRS...