hit counter script
Siemens SIMATIC RF300 System Manual
  1. Manuals
  2. Brands
  3. Siemens Manuals
  4. Card Reader
  5. SIMATIC RF300
  6. System manual

Siemens SIMATIC RF300 System Manual

Rfid-systems simatic sensors
Hide thumbs Also See for SIMATIC RF300:
Table of Contents

Advertisement

Quick Links

See also: System Manual
System Manual Edition 04/2006
SIMATIC Sensors RFID systems SIMATIC RF300
RFID-SYSTEMS
SIMATIC RF300
simatic sensors

Advertisement

Table of Contents
loading

Related Manuals for Siemens SIMATIC RF300

Summary of Contents for Siemens SIMATIC RF300

  • Page 1 System Manual Edition 04/2006 SIMATIC Sensors RFID systems SIMATIC RF300 RFID-SYSTEMS SIMATIC RF300 simatic sensors...
  • Page 3 Introduction Safety information System overview SIMATIC Sensors RF300 system planning RFID systems SIMATIC RF300 Readers Transponders System Manual Communication modules System diagnostics Accessories Appendix Release 04/2006 J31069 D0166-U001-A2-7618...

  • Page 4: Technical Data

    Trademarks All names identified by ® are registered trademarks of the Siemens AG. The remaining trademarks in this publication may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.

  • Page 5: Table Of Contents

    3.2.4 Technical data..........................3-5 RF300 system planning .......................... 4-1 Fundamentals of application planning ..................4-1 4.1.1 Selection criteria for SIMATIC RF300 components ..............4-1 4.1.2 Transmission window and read/write distance ................4-2 4.1.3 Width of the transmission window....................4-5 4.1.4 Impact of secondary fields ......................
  • Page 6 Metal-free area......................... 5-13 5.4.5 Minimum distance between RF340R readers................5-13 5.4.6 Technical data of the RF340R reader..................5-14 5.4.7 FCC information ........................5-15 5.4.8 Ordering data for RF340R......................5-15 5.4.9 Dimension drawing........................5-16 SIMATIC RF300 System Manual, Release 04/2006, J31069 D0166-U001-A2-7618...
  • Page 7 RF360T ............................ 6-13 6.5.1 Features ........................... 6-13 6.5.2 Metal-free area......................... 6-14 6.5.3 Technical data.......................... 6-16 6.5.4 Ordering data ........................... 6-16 6.5.5 Dimension drawing ........................6-17 Memory configuration of the RF300 tags................. 6-18 SIMATIC RF300 System Manual, Release 04/2006, J31069 D0166-U001-A2-7618...
  • Page 8 Ordering data ........................... 7-50 System diagnostics..........................8-1 Overview ............................ 8-1 Reader diagnostics with SLG STATUS ..................8-2 Transponder diagnostics with MDS STATUS ................8-4 Accessories ............................9-1 RFID Systems Software & Documentation ................9-1 SIMATIC RF300 System Manual, Release 04/2006, J31069 D0166-U001-A2-7618...
  • Page 9 Pin assignment of RF310R with IQ-Sense interface ..............7-4 Table 7-2 Technical data for ASM 452..................... 7-14 Table 7-3 LED indication for PROFIBUS diagnosis................. 7-15 Table 7-4 Ordering data for ASM 452 and accessories................7-17 SIMATIC RF300 System Manual, Release 04/2006, J31069 D0166-U001-A2-7618...
  • Page 10 Function of the LEDs on the ASM 475..................7-45 Table 7-17 Operating status display on ASM 475 via LEDs ..............7-45 Table 7-18 Technical data for ASM 475..................... 7-49 Table 7-19 Ordering data for ASM 475 ...................... 7-50 SIMATIC RF300 viii System Manual, Release 04/2006, J31069 D0166-U001-A2-7618...

  • Page 11: Introduction

    System overview Overview of all RF identification systems, system overview of SIMATIC RF300 RFID system planning Information about possible applications of SIMATIC RF300, support for application planning, tools for finding suitable SIMATIC RF300 components.

  • Page 12: Preface

    Scope of validity of this document This documentation is valid for all supplied variations of the SIMATIC RF300 system and describes the state of delivery as of April 2006. History...

  • Page 13: Safety Information

    Contact your technical support team or your sales outlet to find out which system upgrades are suitable for installation. Caution If you cause system defects by installing or exchanging system expansion devices, the warranty becomes void. SIMATIC RF300 System Manual, Release 04/2006, J31069 D0166-U001-A2-7618...
  • Page 14 Safety information SIMATIC RF300 System Manual, Release 04/2006, J31069 D0166-U001-A2-7618...

  • Page 15: System Overview

    System overview RFID systems RFID systems from Siemens control and optimize material flow. They identify reliably, quickly and economically, are insensitive to contamination and store data directly on the product. Identification Frequency Range, Memory, Data transfer Temperature, Special features system max.

  • Page 16: Rf300 System Overview

    RF300 3.2.1 RF300 system overview SIMATIC RF300 is an inductive identification system specially designed for use in industrial production for the control and optimization of material flow. Thanks to its compact dimensions, RF300 is the obvious choice where installation conditions are restricted, especially for assembly lines, handling systems and workpiece carrier systems.

  • Page 17: Application Areas Of Rf300

    SIMATIC RF300 is primarily used for non-contact identification of containers, palettes and workpiece holders in a closed production circuit. The data carriers (transponders) remain in the production chain and are not supplied with the products. SIMATIC RF300, with its compact transponder and reader enclosure dimensions, is particularly suitable in confined spaces.

  • Page 18: Rfid Components And Their Function

    The RF310R and RF340R readers are equipped with an integral antenna, whereas the RF350R reader is operated over an external antenna. In this system manual, the term "Reader" is used throughout even where it is actually referring to the antenna of the reader. SIMATIC RF300 System Manual, Release 04/2006, J31069 D0166-U001-A2-7618...

  • Page 19: Technical Data

    Transponder: -40°C to +85°C Degree of protection Reader: IP 65 Transponder: > IP 67 Can be connected to SIMATIC S7-300, Profibus DP V1, , non-Siemens PLC Special features High noise immunity Compact components Extensive diagnostic options A reader with IQ-Sense interface...
  • Page 20 System overview 3.2 RF300 SIMATIC RF300 System Manual, Release 04/2006, J31069 D0166-U001-A2-7618...

  • Page 21: Rf300 System Planning

    RF300 system planning Fundamentals of application planning 4.1.1 Selection criteria for SIMATIC RF300 components Assess your application according to the following criteria, in order to choose the right SIMATIC RF300 components: • Transmission distance (read/write distance) • Tracking tolerances • Static or dynamic data transfer •...

  • Page 22: Transmission Window And Read/Write Distance

    Length of a transmission window The length L is valid for the calculation. At S , the field length increases from L to L a,min Intersection of the axes of symmetry of the transponder SIMATIC RF300 System Manual, Release 04/2006, J31069 D0166-U001-A2-7618...
  • Page 23 Length of a transmission window in the y direction The length L is valid for the calculation. At S , the field length increases from L to L a,min y max see field data. Center of antenna SIMATIC RF300 System Manual, Release 04/2006, J31069 D0166-U001-A2-7618...
  • Page 24 . The active operating area reduces as the distance increases, and shrinks to a single point at distance S . Only static mode should thus be used in the area between S and S SIMATIC RF300 System Manual, Release 04/2006, J31069 D0166-U001-A2-7618...

  • Page 25: Width Of The Transmission Window

    They should only be applied during planning in exceptional cases, however, since the read/write distances are very limited. Exact details of the secondary field geometry cannot be given, since these values depend heavily on the operating distance and the application. SIMATIC RF300 System Manual, Release 04/2006, J31069 D0166-U001-A2-7618...

  • Page 26: Permissible Directions Of Motion Of The Transponder

    The figure below shows the active area for various directions of transponder motion: Figure 4-1 Active areas of the transponder for different directions of transponder motion SIMATIC RF300 System Manual, Release 04/2006, J31069 D0166-U001-A2-7618...

  • Page 27: Operation In Static And Dynamic Mode

    (SP) of the transponder enters the circle of the transmission window. In dynamic mode, the operating distance (S ) is of primary importance. Figure 4-3 Operation in dynamic mode SIMATIC RF300 System Manual, Release 04/2006, J31069 D0166-U001-A2-7618...

  • Page 28: Dwell Time Of The Transponder

    In general: t ≥ Dwell time of the data memory within the field of the reader Communication time between transponder and communication module SIMATIC RF300 System Manual, Release 04/2006, J31069 D0166-U001-A2-7618...

  • Page 29: Communication Between Communication Module, Reader (With Iq-Sense Interface) And Transponder

    Write (FRAM area) Write (EEPROM area) The table of time constants applies to every command. If a user command consists of several subcommands, the above t formula must be applied to each subcommand. SIMATIC RF300 System Manual, Release 04/2006, J31069 D0166-U001-A2-7618...

  • Page 30: Calculation Example (Iq-Sense)

    Refer to the tables in the "Field data of transponders and readers" section for the technical data. Determine tolerance of pallet transport height Figure 4-4 Tolerance of pallet transport height Determine tolerance of pallet side transport Figure 4-5 Tolerance of pallet side transport SIMATIC RF300 4-10 System Manual, Release 04/2006, J31069 D0166-U001-A2-7618...
  • Page 31 Table "Time constants K and t ". Byte Byte (FRAM area) ms 15ms − − 13.47 byte ⇒ max. Byte Result A maximum of 13 bytes can be read or written when passing the transponder. SIMATIC RF300 4-11 System Manual, Release 04/2006, J31069 D0166-U001-A2-7618...

  • Page 32: Communication Between Communication Module, Reader (With Rs 422 Interface) And Transponder

    Constant; the constant is an internal system time. This contains the time for power buildup on the transponder and for command transfer If the transmission is interrupted briefly due to external interference, the communication module automatically continues the command. SIMATIC RF300 4-12 System Manual, Release 04/2006, J31069 D0166-U001-A2-7618...
  • Page 33 The values shown above must be used when calculating the maximum quantity of user data in dynamic mode. They are applicable for both writing and reading. SIMATIC RF300 4-13 System Manual, Release 04/2006, J31069 D0166-U001-A2-7618...

  • Page 34: Calculation Example (Rs 422)

    Refer to the tables in the "Field data of transponders and readers" section for the technical data. Determine tolerance of pallet transport height Figure 4-6 Tolerance of pallet transport height Determine tolerance of pallet side transport Figure 4-7 Tolerance of pallet side transport SIMATIC RF300 4-14 System Manual, Release 04/2006, J31069 D0166-U001-A2-7618...
  • Page 35 Table "Time constants K and t ". Byte Byte (FRAM area) 30,4ms 8,5ms − − 168,46 Byte ⇒ 0,13ms Byte Result A maximum of 168 bytes can be read or written when passing the transponder. SIMATIC RF300 4-15 System Manual, Release 04/2006, J31069 D0166-U001-A2-7618...

  • Page 36: Field Data For Transponders, Readers And Antennas

    4.2 Field data for transponders, readers and antennas Field data for transponders, readers and antennas The following table shows the field data for all SIMATIC RF300 components of transponders and readers. It facilitates the correct selection of a transponder and reader.
  • Page 37 • A maximum mean deviation of ±2 mm is possible in static mode (without affecting the field data) • This is reduced by approx. 15 % if the transponder enters the transmission window laterally (see also "Transmission window" figure) SIMATIC RF300 4-17 System Manual, Release 04/2006, J31069 D0166-U001-A2-7618...

  • Page 38: Configuration

    SET-ANT command can be used to activate and deactivate the HF field of the reader. The application software must be used to ensure that only one reader is active (antenna is switched on) at a time. SIMATIC RF300 4-18 System Manual, Release 04/2006, J31069 D0166-U001-A2-7618...

  • Page 39: Relationship Between The Volume Of Data And The Transponder Speed

    The curves shown here show the relationship between the speed of the RF320T and RF340T transponders and the volume of data transferred. Figure 4-8 Relationship between speed and volume of data when using the RF310R (IQ-Sense) SIMATIC RF300 4-19 System Manual, Release 04/2006, J31069 D0166-U001-A2-7618...

  • Page 40: Rf310R With Rs 422

    Working distance (Sa) 10 mm 20 mm 22 mm 26 mm Figure 4-9 Relationship between speed and volume of data (reading from EEPROM) when using the RF310R (RS 422) and RF320T SIMATIC RF300 4-20 System Manual, Release 04/2006, J31069 D0166-U001-A2-7618...
  • Page 41 Relationship between speed and volume of data (writing to EEPROM) when using the RF310R (RS 422) and RF320T Figure 4-11 Relationship between speed and volume of data (reading/writing) when using the RF310R (RS 422) and RF340T SIMATIC RF300 4-21 System Manual, Release 04/2006, J31069 D0166-U001-A2-7618...
  • Page 42 Relationship between speed and volume of data (reading/writing) when using the RF310R (RS 422) and RF350T/RF360T Note: The curves for the RF320T are valid for reading/writing to the EEPROM memory area of the RF340T, RF350T and RF360T transponders. SIMATIC RF300 4-22 System Manual, Release 04/2006, J31069 D0166-U001-A2-7618...

  • Page 43: Rf340R

    Working distance (Sa) 10 mm 20 mm 22 mm 26 mm Figure 4-13 Relationship between speed and volume of data (reading/writing from FRAM) in dynamic operation when using the RF340R and RF320T SIMATIC RF300 4-23 System Manual, Release 04/2006, J31069 D0166-U001-A2-7618...
  • Page 44 Relationship between speed and volume of data (reading/writing from FRAM) in dynamic operation when using the RF340R and RF340T Figure 4-15 Relationship between speed and volume of data (reading/writing from FRAM) in dynamic operation when using the RF340R and RF350T SIMATIC RF300 4-24 System Manual, Release 04/2006, J31069 D0166-U001-A2-7618...
  • Page 45 Relationship between speed and volume of data (reading/writing from FRAM) in dynamic operation when using the RF340R and RF360T Note: The curve for the RF320T is valid for reading/writing to the EEPROM memory area of the RF340T, RF350T and RF360T transponders. SIMATIC RF300 4-25 System Manual, Release 04/2006, J31069 D0166-U001-A2-7618...

  • Page 46: Rf350R

    10 mm 20 mm 22 mm 26 mm Figure 4-17 Relationship between speed and volume of data (reading/writing from FRAM) in dynamic operation when using the RF350R with ANT1 and RF320T SIMATIC RF300 4-26 System Manual, Release 04/2006, J31069 D0166-U001-A2-7618...
  • Page 47 RF350R with ANT1 and RF340T Figure 4-19 Relationship between speed and volume of data (reading/writing from FRAM) in dynamic operation when using the RF350R with ANT1 and RF350T SIMATIC RF300 4-27 System Manual, Release 04/2006, J31069 D0166-U001-A2-7618...
  • Page 48 Note: The antennas ANT18 and ANT30 only have small transmission windows. They are therefore only suitable for dynamic operation to a limited extent. It was not necessary to show corresponding curves. SIMATIC RF300 4-28 System Manual, Release 04/2006, J31069 D0166-U001-A2-7618...

  • Page 49: Installation Guidelines

    This affects the entire field. In particular, the transmission window between reader and transponder is reduced. Remedy: The transmission window is no longer affected if the transponder is mounted differently. SIMATIC RF300 4-29 System Manual, Release 04/2006, J31069 D0166-U001-A2-7618...
  • Page 50 Increasing a, b has a greater • effect for readers or transponders with a large limit distance than for readers or transponders with a small limit distance. SIMATIC RF300 4-30 System Manual, Release 04/2006, J31069 D0166-U001-A2-7618...
  • Page 51 Remedy Insert a non-metallic spacer of 20 to 40 millimeter thickness between the reader and the iron frame. This will significantly reduce the induction of stray fields on the rack: SIMATIC RF300 4-31 System Manual, Release 04/2006, J31069 D0166-U001-A2-7618...

  • Page 52: Effects Of Metal On Different Transponders And Readers

    Certain conditions have to be observed when mounting the transponders and readers on metal or flush-mounting. For more information, please refer to the descriptions of the individual transponders and readers in the relevant section. SIMATIC RF300 4-32 System Manual, Release 04/2006, J31069 D0166-U001-A2-7618...

  • Page 53: Impact On The Transmission Window By Metal

    20 mm RF350T Without metal on metal Flush-mounted in metal; distance all-round 20 mm RF360T Without metal On metal; distance 20 mm Flush-mounted in metal; distance all-round 20 mm SIMATIC RF300 4-33 System Manual, Release 04/2006, J31069 D0166-U001-A2-7618...

  • Page 54: Rf340R

    20 mm RF350T Without metal on metal Flush-mounted in metal; distance all-round 20 mm RF360T Without metal On metal; distance 20 mm Flush-mounted in metal; distance all-round 20 mm SIMATIC RF300 4-34 System Manual, Release 04/2006, J31069 D0166-U001-A2-7618...

  • Page 55: Rf350R

    Flush-mounted in metal; distance all-round 20 mm RF360T Without metal On metal; distance 20 mm Flush-mounted in metal; distance all-round 20 mm Reduction of field data: Transponder and RF350R reader with ANT18 SIMATIC RF300 4-35 System Manual, Release 04/2006, J31069 D0166-U001-A2-7618...

  • Page 56: Table 4-7 Reduction Of Field Data By Metal (In %): Transponder And Rf350R With Ant18

    RF350T Without metal on metal Flush-mounted in metal; distance all-round 20 mm RF360T Without metal On metal; distance 20 mm Flush-mounted in metal; distance all-round 20 mm 1) combination not permitted SIMATIC RF300 4-36 System Manual, Release 04/2006, J31069 D0166-U001-A2-7618...
  • Page 57 RF350T Without metal on metal Flush-mounted in metal; distance all-round 20 mm RF360T Without metal On metal; distance 20 mm Flush-mounted in metal; distance all-round 20 mm 1) combination not permitted SIMATIC RF300 4-37 System Manual, Release 04/2006, J31069 D0166-U001-A2-7618...

  • Page 58: Chemical Resistance Of The Transponders

    100 % ￮￮￮￮ Bromine water ￚ Butadiene (1,3–) ￮￮￮￮ Butane gas ￮￮￮￮ Butanol ￚ Butyric acid 100 % ￮￮ Carbonate (ammonium, ￮￮￮￮ Na.a.) Chlorine, liquid ￚ Chlorine, gas, dry 100 % ￚ SIMATIC RF300 4-38 System Manual, Release 04/2006, J31069 D0166-U001-A2-7618...
  • Page 59 Glycol ￮￮￮￮ Urine ￮￮￮￮ Uric acid ￮￮￮￮ Hydroxide (ammonium) 10 % ￮￮￮￮ Hydroxide (Na–, K–) 40 % ￮￮￮￮ Hydroxide (alkaline earth ￮￮￮￮ metal) Hypochlorite (K–, Na.a.) ￮￮￮￮ Iodide (K–, Na.a.) ￮￮￮￮ SIMATIC RF300 4-39 System Manual, Release 04/2006, J31069 D0166-U001-A2-7618...
  • Page 60 40 % ￚ Sulphurous acid ￮￮ Soap solution ￮￮￮￮ Sulfate (ammonium, Na.a.) ￮￮￮￮ Sulfite (ammonium, Na.a.) ￚ Tar, aroma-free ￮￮￮￮ Turpentine ￮￮￮￮ Trichloroethylene ￚ Hydrogen peroxide 30 % ￮￮￮￮ Tartaric acid ￮￮￮￮ SIMATIC RF300 4-40 System Manual, Release 04/2006, J31069 D0166-U001-A2-7618...
  • Page 61 ￮￮￮￮ Isopropanol ￮￮￮￮ ￮￮￮ Potassium hydroxide, w. ￮￮￮￮ ￮￮￮￮ Lysol ￮￮ ￚ Magnesium salts, w. k. g. ￮￮￮￮ ￮￮￮￮ Methyl alcohol, w. ￮￮￮￮ ￮￮￮￮ Lactic acid, w. ￮￮ ￚ ￮￮￮ ￮￮ SIMATIC RF300 4-41 System Manual, Release 04/2006, J31069 D0166-U001-A2-7618...
  • Page 62 Toluene ￮￮￮￮ ￮￮￮ Detergent High ￮￮￮￮ ￮￮￮￮ Plasticizer ￮￮￮￮ ￮￮￮￮ Abbreviations ￮￮￮￮ Resistant ￮￮￮ Virtually resistant ￮￮ Partially resistant ￮ Less resistant ￚ Not resistant Aqueous solution k. g. Cold saturated SIMATIC RF300 4-42 System Manual, Release 04/2006, J31069 D0166-U001-A2-7618...

  • Page 63: Emc Directives

    Notice Failure to observe notices drawn to the reader's attention can result in dangerous conditions in the plant or the destruction of individual components or the entire plant. SIMATIC RF300 4-43 System Manual, Release 04/2006, J31069 D0166-U001-A2-7618...

  • Page 64: What Does Emc Mean?

    All measures taken when setting up the plant prevent expensive retrospective modifications and interference suppression measures. The plant operator must comply with the locally applicable laws and regulations. They are not covered in this document. SIMATIC RF300 4-44 System Manual, Release 04/2006, J31069 D0166-U001-A2-7618...

  • Page 65: Basic Rules

    • Twist the feed and return conductors of separately installed cables. • Cable routing of HF cables: Avoid installing cables in parallel over long distances and maintain minimum distances between the cables (at least 25 cm). SIMATIC RF300 4-45 System Manual, Release 04/2006, J31069 D0166-U001-A2-7618...
  • Page 66 • Connect the filter housing to the cabinet chassis using a large-area low-HF-impedance connection. • Never fix the filter housing to a painted surface. • Fix the filter at the control cabinet inlet or in the direction of the source. SIMATIC RF300 4-46 System Manual, Release 04/2006, J31069 D0166-U001-A2-7618...

  • Page 67: Propagation Of Electromagnetic Interference

    • The design of the system must be such that mutual interference between individual components is precluded or kept as small as possible. Information and tips for plant design are given in the following sections. SIMATIC RF300 4-47 System Manual, Release 04/2006, J31069 D0166-U001-A2-7618...
  • Page 68 HF interference over the caused by another reader • reader. antennas Position the antennas further • apart. Erect suitable damping materials • between the antennas. Reduce the power of the readers. • SIMATIC RF300 4-48 System Manual, Release 04/2006, J31069 D0166-U001-A2-7618...
  • Page 69 Inappropriate physical arrangement of cables • Missing or incorrectly wired equalizing conductor Control cabinet or housing • Missing or incorrect earthing • Inappropriate physical arrangement • Components not mounted securely • Unfavorable cabinet configuration • SIMATIC RF300 4-49 System Manual, Release 04/2006, J31069 D0166-U001-A2-7618...

  • Page 70: Cabinet Configuration

    HF conducting paste. The larger the area of the connection, the greater the high-frequency conductivity. This is not possible using single-wire connections. SIMATIC RF300 4-50 System Manual, Release 04/2006, J31069 D0166-U001-A2-7618...

This manual is also suitable for:

Simatic rf310rSimatic rf350tRf340rRf350rRf360tAsm 452 ... Show all

Table of Contents