Graphical Front Panel - GE B30 Instruction Manual
Bus differential system
Hide thumbs
Also See for B30:
- Instruction manual (626 pages) ,
- Communications manual (532 pages) ,
- Technical reference manual (252 pages)
Table of Contents
Advertisement
CHAPTER 5: SETTINGS
Lower the
VOLTAGE CUT-OFF LEVEL
measurements. Unless dictated otherwise by a specific application, the default settings of "0.02 pu" for
and "1.0 V" for
CUT-OFF LEVEL
5.3.3 Graphical front panel
The graphical front panel is a hardware option. See the Order Codes section in chapter 2 for details.
Use the EnerVista software to configure the graphical front panel. The settings are not accessible from the graphical front
panel.
The following screens are available:
•
Home page
•
Rolling mode
•
Metering editor
•
Single-line diagram editor
•
Annunciator editor
•
Configurable navigation
The settings menu itself and the event record pages are not configurable.
Multiple screens can be opened in the EnerVista software, but the first remains active and the others can be read-only. For
example, the Annunciator Editor and Single Line Diagram Editor can be open and active, then subsequently opened Rolling
Mode and Home Page screens are read-only. Close the windows, then re-open the one required.
5.3.3.1 Home page
This window sets the home page displayed on the graphical front panel and the date and time formats for all pages. Home
page options include display of product information, alarms, actual values, and event records.
The path is Settings > Product Setup > Graphical Panel > Home Page. The menu does not display when there is no
graphical front panel.
B30 BUS DIFFERENTIAL SYSTEM – INSTRUCTION MANUAL
and
CURRENT CUT-OFF LEVEL
are recommended.
VOLTAGE CUT-OFF LEVEL
with care as the relay accepts lower signals as valid
PRODUCT SETUP
CURRENT
5
5-27
Advertisement
Table of Contents
