Spanning-Tree Mst Priority - Cisco Catalyst 2960-X Command Reference Manual
Layer 2
Hide thumbs
Also See for Catalyst 2960-X:
- Security configuration manual (498 pages) ,
- Hardware installation manual (34 pages) ,
- Getting started manual (25 pages)
Table of Contents
Advertisement
Layer 2 Commands
spanning-tree mst priority
To set the bridge priority for an instance, use the spanning-tree mst priority command in global configuration
mode. To return to the default setting, use the no form of this command.
spanning-tree mst instance priority priority
no spanning-tree mst priority
Syntax Description
instance
priority priority
Command Default
The default is 32768.
Command Modes
Global configuration
Command History
Release
Cisco IOS 15.0(2)EX
Usage Guidelines
You can set the bridge priority in increments of 4096 only. Valid values are 0, 4096, 8192, 12288, 16384,
20480. 24576, 28672, 32768, 40960, 45056, 49152, 53248, 57344 and 61440.
You can enter instance as a single instance or a range of instances, for example, 0-3,5,7-9.
Examples
This example shows how to set the spanning tree priority for MST instance 0 to 4096:
Switch(config)# spanning-tree mst 0 priority 4096
Related Commands
Command
spanning-tree mst configuration
spanning-tree mst root
OL-29043 -01
Instance identification number. The range is 0 to 4094.
Specifies the bridge priority. The range is 0 to 614440 in increments of
4096.
Modification
This command was introduced.
Description
Enters MST configuration mode.
Configures the MST root swtich.
Catalyst 2960-X Switch Layer 2 Command Reference, Cisco IOS Release 15.0(2)EX
spanning-tree mst priority
101
- Quick Links:
- Layer 2 Commands
Hide quick links:
Advertisement
Table of Contents
