Show Link State Group - Cisco Catalyst 2960-X Command Reference Manual
Layer 2
Hide thumbs
Also See for Catalyst 2960-X:
- Security configuration manual (498 pages) ,
- Hardware installation manual (34 pages) ,
- Getting started manual (25 pages)
Table of Contents
Advertisement
Layer 2 Commands
show link state group
To display link-state group information, use the show link state group command in privileged EXEC mode.
show link state group [number][detail]
Syntax Description
number
detail
Command Default
None
Command Modes
Privileged EXEC
Command History
Release
Cisco IOS 15.0(2)EX
Usage Guidelines
This command is supported only on the LAN Base image.
To display information about all link-state groups, enter this command without keywords. To display
information about a specific link-state group enter the link-state group number.
The output for the show link state group detail displays information for only those link-state groups that
have link-state tracking enabled or that have upstream or downstream interfaces configured. If the group does
not have a configuration, the group is not shown as enabled or disabled.
Examples
This example shows the output from the show link state group number command:
Switch# show link state group 1
Link State Group: 1
This example shows the output from the show link state group detail command:
Switch# show link state group detail
(Up):Interface up (Dwn):Interface Down (Dis):Interface disabled
Link State Group: 1 Status: Enabled, Down
Upstream Interfaces : Gi1/0/15(Dwn) Gi1/0/16(Dwn)
Downstream Interfaces : Gi1/0/11(Dis) Gi1/0/12(Dis) Gi1/0/13(Dis) Gi1/0/14(Dis)
Link State Group: 2 Status: Enabled, Down
Upstream Interfaces : Gi1/0/15(Dwn) Gi1/0/16(Dwn) Gi1/0/17(Dwn)
Downstream Interfaces : Gi1/0/11(Dis) Gi1/0/12(Dis) Gi1/0/13(Dis) Gi1/0/14(Dis)
(Up):Interface up (Dwn):Interface Down (Dis):Interface disabled
OL-29043 -01
(Optional) Specifies the number of the link-state group number. The range is 1
to 2.
(Optional) Displays detailed information about the link-state group.
Modification
This command was introduced.
Status: Enabled. Down
Catalyst 2960-X Switch Layer 2 Command Reference, Cisco IOS Release 15.0(2)EX
show link state group
63
- Quick Links:
- Layer 2 Commands
Hide quick links:
Advertisement
Table of Contents
