Show Link State Group - Cisco ME 3400 Command Reference Manual

Ethernet access switch

Hide thumbs Also See for ME 3400:

Table of Contents

show link state group

Use the show link state group global configuration command to display the link-state group

information.

This command is available only if your switch is running the metro IP access or metro access image.

Syntax Description

There is no default.

Command Modes

Privileged EXEC

Command History

Usage Guidelines

Use the show link state group command to display the link-state group information. Enter this

command without keywords to display information about all link-state groups. Enter the group number

to display information specific to the group.

Enter the detail keyword to display detailed information about the group. The output for the show link

state group detail command displays only those link-state groups that have link-state tracking enabled

or that have upstream or downstream interfaces (or both) configured. If there is no link-state group

configuration for a group, it is not shown as enabled or disabled.

Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output

are not displayed, but the lines that contain Output are displayed.

This is an example of output from the show link state group 1 command:

Switch> show link state group 1

Link State Group: 1

Cisco ME 3400 Ethernet Access Switch Command Reference

show link state group [number] [detail] [ | {begin | exclude | include} expression]

Modification

This command was introduced.

Status: Enabled, Down

Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands

(Optional) Number of the link-state group.

(Optional) Specify that detailed information appears.

(Optional) Display begins with the line that matches the expression.

(Optional) Display excludes lines that match the expression.

(Optional) Display includes lines that match the specified expression.

Expression in the output to use as a reference point.