Cisco ME 3400 Command Reference Manual page 530

Ethernet access switch

Hide thumbs Also See for ME 3400:

Table of Contents

show lacp internal Field Descriptions (continued)

This is an example of output from the show lacp neighbor command:

Switch> show lacp neighbor

Channel group 3 neighbors

Partner's information:

Partner's information:

Cisco ME 3400 Ethernet Access Switch Command Reference

Administrative key assigned to this port. LACP automatically generates an

administrative key value as a hexadecimal number. The administrative key defines the

ability of a port to aggregate with other ports. A port's ability to aggregate with other

ports is determined by the port physical characteristics (for example, data rate and

duplex capability) and configuration restrictions that you establish.

Runtime operational key that is being used by this port. LACP automatically generates

this value as a hexadecimal number.

Port number.

State variables for the port, encoded as individual bits within a single octet with these

bit0: LACP_Activity

bit1: LACP_Timeout

bit2: Aggregation

bit3: Synchronization

bit4: Collecting

bit5: Distributing

bit6: Defaulted

bit7: Expired

In the above list, bit7 is the MSB and bit0 is the LSB.

S - Device is sending Slow LACPDUs F - Device is sending Fast LACPDUs

A - Device is in Active mode

32768,0007.eb49.5e80

LACP Partner

Port Priority

32768,0007.eb49.5e80

LACP Partner

Port Priority

Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands

P - Device is in Passive mode