Show Platform Policer Cpu - Cisco ME 3400 Command Reference Manual

Ethernet access switch

Hide thumbs Also See for ME 3400:

Table of Contents

show platform policer cpu

Use the show platform policer cpu privileged EXEC command to display CPU control-plane policer

statistics per feature or the indexes and the corresponding feature for the specified port.

Syntax Description

classification

interface-id

Command Modes

Privileged EXEC

Command History

Usage Guidelines

For CPU protection of user network interfaces (UNIs) and enhanced network interfaces (ENIs), the

switch pre-allocates the 27 CPU protection policers, numbered 0 to 26. A policer of 26 means a drop

policer; any traffic type shown as 26 on any port is dropped. A policer of a value of 0 to 25 means that

a rate-limiting policer is assigned to the port for the control protocol. A policer value of 255 means that

no policer is assigned to a control protocol. Network node interfaces (NNIs) have no policers assigned.

Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output

are not displayed, but the lines that contain Output are displayed.

Cisco ME 3400 Ethernet Access Switch Command Reference

show platform policer cpu {classification | interface interface-id} [ | {begin | exclude | include}

Displays policer statistics per feature.

Display the policer indexes for a specific interface.

(Optional) Display begins with the line that matches the expression.

(Optional) Display excludes lines that match the expression.

(Optional) Display includes lines that match the specified expression.

Expression in the output to use as a reference point.

Modification

This command was introduced.

Cisco ME 3400 Ethernet Access Switch Show Platform Commands