Show Interfaces Counters - Cisco ME 3400 Command Reference Manual

Ethernet access switch

Hide thumbs Also See for ME 3400:

Table of Contents

show interfaces counters

Use the show interfaces counters privileged EXEC command to display various counters for the switch

or for a specific interface.

Syntax Description

interface-id

module switch- number (Optional) Display counters for the specified switch number. The only

etherchannel

protocol status

Though visible in the command-line help string, the vlan vlan-id keyword is not supported.

Command Modes

Privileged EXEC

Command History

Usage Guidelines

If you do not enter any keywords, all counters for all interfaces are included.

Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output

are not displayed, but the lines that contain Output are displayed.

This is an example of partial output from the show interfaces counters command. It displays all

counters for the switch.

Switch# show interfaces counters

Cisco ME 3400 Ethernet Access Switch Command Reference

show interfaces [interface-id | vlan vlan-id] counters [errors | trunk] [module switch- number] |

etherchannel | protocol status] [ | {begin | exclude | include} expression]

(Optional) ID of the physical interface, including type, module, and port

(Optional) Display error counters.

(Optional) Display trunk counters.

available value is 1.

(Optional) Display EtherChannel counters, including octets, broadcast

packets, multicast packets, and unicast packets received and sent.

(Optional) Display status of protocols enabled on interfaces.

(Optional) Display begins with the line that matches the expression.

(Optional) Display excludes lines that match the expression.

(Optional) Display includes lines that match the specified expression.

Expression in the output to use as a reference point.

Modification

This command was introduced.

Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands