Show Flowcontrol - Cisco ME 3400 Command Reference Manual

Ethernet access switch

Hide thumbs Also See for ME 3400:

Table of Contents

show flowcontrol

Use the show flowcontrol user EXEC command to display the flow control status and statistics.

Syntax Description

interface interface-id

module number

Command Modes

Command History

Usage Guidelines

Use this command to display the flow control status and statistics on the switch or for a specific interface.

Use the show flowcontrol command to display information about all the switch interfaces. The output

from the show flowcontrol command is the same as the output from the show flowcontrol module

number command.

Use the show flowcontrol interface interface-id command to display information about a specific

Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output

do not appear, but the lines that contain Output appear.

This is an example of output from the show flowcontrol command.

Switch> show flowcontrol

Cisco ME 3400 Ethernet Access Switch Command Reference

show flowcontrol [interface interface-id | module number] [ | {begin | exclude | include}

(Optional) Display the flow control status and statistics for a specific

(Optional) Display the flow control status and statistics for all interfaces on the

switch. The only valid module number is 1. This option is not available if you

have entered a specific interface ID.

(Optional) Display begins with the line that matches the expression.

(Optional) Display excludes lines that match the expression.

(Optional) Display includes lines that match the specified expression.

Expression in the output to use as a reference point.

Modification

This command was introduced.

Send FlowControl

-------- -------- -------- --------

Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands

Receive FlowControl

RxPause TxPause

------- -------