Debug Ip Sla Trace Twamp Session - Cisco ME 3400 Command Reference Manual
Ethernet access switch
Hide thumbs
Also See for ME 3400:
- Software configuration manual (1138 pages) ,
- Command reference manual (872 pages) ,
- Hardware installation manual (88 pages)
Table of Contents
Advertisement
debug ip sla trace twamp session
debug ip sla trace twamp session
Use the debug ip sla trace twamp session command in privileged EXEC mode to enable debugging
output of Cisco IOS IP Service Level Agreements (SLAs) Two-Way Active Measurement Protocol
(TWAMP) normal session communication between the TWAMP sender and reflector. Use the no form
of this command to disable debugging output.
Syntax Description
source-ip
ip-address
source-port
port-number
Command Modes
Privileged EXEC
Command History
Release
12.2(52)SE
Usage Guidelines
The debug ip sla trace twamp session privileged EXEC command displays normal session
communication between the TWAMP sender and reflector.
Use the debug ip sla error twamp session command before using the debug ip sla trace twamp session
Note
command because the debug ip sla error twamp session command generates less debugging output.
The debug ip sla trace twamp session command is supported in IPv4 networks.
The undebug ip sla trace twamp session command is the same as the no debug ip sla trace twamp
session command.
Related Commands
Command
debug ip sla error twamp
connection
debug ip sla error twamp
control reflector
debug ip sla error twamp
control server
debug ip sla error twamp
session
Cisco ME 3400 Ethernet Access Switch Command Reference
B-26
debug ip sla trace twamp session [source-ip ip-address | source-port port-number]
no debug ip sla trace twamp session [source-ip ip-address | source-port port-number]
(Optional) Debug IP Performance Metrics (IPPM) TWAMP connections for
the specified source. Specify the source using the client device IP address.
(Optional) Debug IP Performance Metrics (IPPM) TWAMP connections for
the specified port.
Modification
This command was introduced.
Appendix B
Cisco ME 3400 Ethernet Access Switch Debug Commands
Description
Displays exceptions during communication between the IP SLAs
TWAMP client and server.
Displays exceptions during communication between the IP SLAs
TWAMP server and reflector.
Displays exceptions during communication between the IP SLAs
TWAMP server and reflector.
Displays exceptions during communication between the IP SLAs
TWAMP sender and reflector.
OL-9640-10
Advertisement
Table of Contents
