Cisco ME 3400 Command Reference Manual page 474
Ethernet access switch
Hide thumbs
Also See for ME 3400:
- Software configuration manual (1138 pages) ,
- Command reference manual (872 pages) ,
- Hardware installation manual (88 pages)
Table of Contents
Advertisement
show interfaces
Fa0/17
Fa0/18
Fa0/19
Fa0/20
Fa0/21
Fa0/22
Fa0/23
Fa0/24
Gi0/1
seTX SFP
Gi0/2
These are examples of output from the show interfaces status command for a specific interface when
private VLANs are configured. Port 22 is configured as a private-VLAN host port. It is associated with
primary VLAN 20 and secondary VLAN 25.
Switch# show interfaces fastethernet0/22 status
Port
Fa0/22
In this example, port 2 is configured as a private-VLAN promiscuous port. The display shows only the
primary VLAN 20.
Switch# show interfaces gigabitethernet0/2 status
Port
Gi0/2
This is an example of output from the show interfaces status err-disabled command for an interface:
Switch# show interfaces gigabitethernet0/2 status err-disabled
Port
Gi0/2
This is an example of output from the show interfaces switchport command for a single port.
Table 2-12
Private VLAN trunks are not supported in this release, so those fields are not applicable.
Note
Switch# show interfaces gigabitethernet0/1 switchport
Name: Gi0/1
Switchport: Enabled
Administrative Mode: static access
Operational Mode: static access
Administrative Trunking Encapsulation: dot1q
Operational Trunking Encapsulation: native
Negotiation of Trunking: Off
Access Mode VLAN: 1 (default)
Trunking Native Mode VLAN: 1 (default)
Administrative Native VLAN tagging: enabled
Administrative private-vlan host-association: none
Administrative private-vlan mapping: none
Administrative private-vlan trunk native VLAN: none
Administrative private-vlan trunk Native VLAN tagging: enabled
Administrative private-vlan trunk encapsulation: dot1q
Administrative private-vlan trunk normal VLANs: none
Administrative private-vlan trunk private VLANs: none
Operational private-vlan: none
Trunking VLANs Enabled: ALL
Capture Mode Disabled
Capture VLANs Allowed: ALL
Cisco ME 3400 Ethernet Access Switch Command Reference
2-446
disabled
disabled
disabled
disabled
disabled
disabled
disabled
disabled
notconnect
connected
Name
Status
connected
Name
Status
connected
Name
Status
connected
describes the fields in the display.
Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
1
auto
1
auto
1
auto
1
auto
1
auto
1
auto
1
auto
1
auto
1
auto
vl-err-dis a-full a-1000 10/100/1000BaseTX
Vlan
Duplex
Speed Type
20,25
a-full
a-100 10/100BaseTX
Vlan
Duplex
Speed Type
20
a-full
a-100 10/100/1000BaseTX
Reason
elmi evc down
auto 10/100BaseTX
auto 10/100BaseTX
auto 10/100BaseTX
auto 10/100BaseTX
auto 10/100BaseTX
auto 10/100BaseTX
auto 10/100BaseTX
auto 10/100BaseTX
auto 10/100/1000Ba
Err-disabled Vlans
1,200
OL-9640-10
Advertisement
Table of Contents
