Show Platform Spanning-Tree Synchronization - Cisco ME 3400 Command Reference Manual
Ethernet access switch
Hide thumbs
Also See for ME 3400:
- Software configuration manual (1138 pages) ,
- Command reference manual (872 pages) ,
- Hardware installation manual (88 pages)
Table of Contents
Advertisement
Appendix C
Cisco ME 3400 Ethernet Access Switch Show Platform Commands
show platform spanning-tree synchronization
Use the show platform spanning-tree synchronization privileged EXEC command to display
platform-dependent spanning-tree state synchronization information.
Syntax Description
detail
vlan vlan-id
| begin
| exclude
| include
expression
Command Modes
Privileged EXEC
Command History
Release
12.2(25)EX
Usage Guidelines
You should use this command only when you are working directly with your technical support
representative while troubleshooting a problem. Do not use this command unless your technical support
representative asks you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
OL-9640-10
show platform spanning-tree synchronization [detail | vlan vlan-id] [ | {begin | exclude |
include} expression]
(Optional) Display detailed spanning-tree synchronization information.
(Optional) Display spanning-tree synchronization information for the specified
VLAN. The range is 1 to 4094.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
show platform spanning-tree synchronization
Cisco ME 3400 Ethernet Access Switch Command Reference
C-41
Advertisement
Table of Contents
