Logging File - Cisco ME 3400 Command Reference Manual

Ethernet access switch

Hide thumbs Also See for ME 3400:

Table of Contents

logging file

Use the logging file global configuration command to set logging file parameters. Use the no form of

this command to return to the default setting.

Syntax Description

filesystem:filename

max-file-size

min-file-size

severity-level-number

The minimum file size is 2048 bytes; the maximum file size is 4096 bytes.

The default severity level is 7 (debugging messages and numerically lower levels).

Command Modes

Global configuration

Command History

Cisco ME 3400 Ethernet Access Switch Command Reference

logging file filesystem:filename [max-file-size [min-file-size]] [severity-level-number | type]

no logging file filesystem:filename [severity-level-number | type]

Alias for a flash file system. Contains the path and name of the file that

contains the log messages.

The syntax for the local flash file system:

(Optional) Specify the maximum logging file size. The range is 4096 to

(Optional) Specify the minimum logging file size. The range is 1024 to

(Optional) Specify the logging severity level. The range is 0 to 7. See the

type option for the meaning of each level.

(Optional) Specify the logging type. These keywords are valid:

Modification

This command was introduced.

Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands

emergencies—System is unusable (severity 0).

alerts—Immediate action needed (severity 1).

critical—Critical conditions (severity 2).

errors—Error conditions (severity 3).

warnings—Warning conditions (severity 4).

notifications—Normal but significant messages (severity 5).

information—Information messages (severity 6).

debugging—Debugging messages (severity 7).