Rmon Collection Stats - Cisco ME 3400 Command Reference Manual
Ethernet access switch
Hide thumbs
Also See for ME 3400:
- Software configuration manual (1138 pages) ,
- Command reference manual (872 pages) ,
- Hardware installation manual (88 pages)
Table of Contents
Advertisement
2 ]
Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
rmon collection stats
Use the rmon collection stats interface configuration command to collect Ethernet group statistics,
which include usage statistics about broadcast and multicast packets, and error statistics about cyclic
redundancy check (CRC) alignment errors and collisions. Use the no form of this command to return to
the default setting.
Syntax Description
index
owner name
Defaults
The RMON statistics collection is disabled.
Command Modes
Interface configuration
Command History
Release
12.2(25)EX
Usage Guidelines
The RMON statistics collection command is based on hardware counters. If the port is a user network
interface (UNI) or enhanced network interface (ENI), you must use the no shutdown interface
configuration command to enable it before using the rmon collection stats command. UNIs and ENIs
are disabled by default. Network node interfaces (NNIs) are enabled by default.
Examples
This example shows how to collect RMON statistics for the owner root:
Switch(config)# interface gigabitethernet0/1
Switch(config-if)# rmon collection stats 2 owner root
You can verify your setting by entering the show rmon statistics privileged EXEC command.
Related Commands
Command
show rmon statistics
OL-9640-10
rmon collection stats index [owner name]
no rmon collection stats index [owner name]
Remote Network Monitoring (RMON) collection control index. The range is
1 to 65535.
(Optional) Owner of the RMON collection.
Modification
This command was introduced.
Description
Displays RMON statistics.
Cisco ME 3400 Ethernet Access Switch Command Reference
rmon collection stats
2-365
Advertisement
Table of Contents
