Ip Ssh - Cisco ME 3400 Command Reference Manual

Ethernet access switch

Hide thumbs Also See for ME 3400:

Table of Contents

Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands

ip ssh

Use the ip ssh global configuration command to configure the switch to run Secure Shell (SSH)

Version 1 or SSH Version 2. Use the no form of this command to return to the default setting.

This command is available only when your switch is running the cryptographic (encrypted) software

Syntax Description

The default version is the latest SSH version supported by the SSH client.

Command Modes

Global configuration

Command History

Usage Guidelines

If you do not enter this command or if you do not specify a keyword, the SSH server selects the latest

SSH version supported by the SSH client. For example, if the SSH client supports SSHv1 and SSHv2,

the SSH server selects SSHv2.

The switch supports an SSHv1 or an SSHv2 server. It also supports an SSHv1 client. For more

information about the SSH server and the SSH client, see the software configuration guide for this

A Rivest, Shamir, and Adelman (RSA) key pair generated by an SSHv1 server can be used by an SSHv2

server and the reverse.

This example shows how to configure the switch to run SSH Version 2:

Switch(config)# ip ssh version 2

You can verify your settings by entering the show ip ssh or show ssh privileged EXEC command.

ip ssh version [1 | 2]

no ip ssh version [1 | 2]

(Optional) Configure the switch to run SSH Version 1 (SSHv1).

(Optional) Configure the switch to run SSH Version 2 (SSHv1).

Modification

This command was introduced.

Cisco ME 3400 Ethernet Access Switch Command Reference