Cisco ME 3400 Command Reference Manual page 226

Ethernet access switch

Hide thumbs Also See for ME 3400:

Table of Contents

ip sticky-arp (global configuration)

To disable sticky ARP:

Switch(config)# no ip sticky-arp

You can verify your settings by using the show arp privileged EXEC command.

Related Commands

Cisco ME 3400 Ethernet Access Switch Command Reference

Use the no sticky-arp global configuration command to disable sticky ARP on the switch.

Use the no sticky-arp interface configuration command to disable sticky ARP on an interface when

sticky ARP is disabled on the switch.

Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands

Adds a permanent entry in the ARP table. For syntax information,

see the Cisco IOS IP Addressing Services Command Reference,

Release 12.4 > ARP Commands.

Displays the entries in the ARP table. For syntax information, see the

Cisco IOS IP Addressing Services Command Reference,

Release 12.4 > ARP Commands.