Show Dot1X - Cisco ME 3400 Command Reference Manual
Ethernet access switch
Hide thumbs
Also See for ME 3400:
- Software configuration manual (1138 pages) ,
- Command reference manual (872 pages) ,
- Hardware installation manual (88 pages)
Table of Contents
Advertisement
Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
show dot1x
Use the show dot1x privileged EXEC command to display IEEE 802.1x statistics, administrative status,
and operational status for the switch or for the specified port.
Syntax Description
all
interface interface-id
statistics interface
interface-id
| begin
| exclude
| include
expression
Command Modes
Privileged EXEC
Command History
Release
12.2(25)EX
Usage Guidelines
If you do not specify a port, global parameters and a summary appear. If you specify a port, details for
that port appear.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output appear.
Examples
This is an example of output from the show dot1x and the show dot1x all privileged EXEC commands:
Switch# show dot1x
Sysauthcontrol
Dot1x Protocol Version
Dot1x Oper Controlled Directions
Dot1x Admin Controlled Directions = Both
Switch# show dot1x all
Dot1x Info for interface GigabitEthernet0/1
----------------------------------------------------
Supplicant MAC 00d0.b71b.35de
AuthSM State
BendSM State
PortStatus
MaxReq
HostMode
Port Control
OL-9640-10
show dot1x [all | interface interface-id | statistics interface interface-id] [ | {begin | exclude |
include} expression]
(Optional) Display the IEEE 802.1x status for all ports.
(Optional) Display the IEEE 802.1x status for the specified port (including
type, module, and port number).
(Optional) Display IEEE 802.1x statistics for the specified port (including
type, module, and port number).
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
= CONNECTING
= IDLE
= UNAUTHORIZED
= 2
= Single
= Auto
= Enabled
= 1
= Both
Cisco ME 3400 Ethernet Access Switch Command Reference
show dot1x
2-417
Advertisement
Table of Contents
