Show Etherchannel - Cisco ME 3400 Command Reference Manual

Ethernet access switch

Hide thumbs Also See for ME 3400:

Table of Contents

Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands

show etherchannel

Use the show etherchannel user EXEC command to display EtherChannel information for a channel.

Syntax Description

channel-group-number

load-balance

port-channel

Command Modes

Command History

Usage Guidelines

If you do not specify a channel-group, all channel groups are displayed.

In the output, the Passive port list field is displayed only for Layer 3 port channels. This field means that

the physical port, which is still not up, is configured to be in the channel group (and indirectly is in the

only port channel in the channel group).

The switch must be running the metro IP access image to support Layer 3 ports.

Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output

are not displayed, but the lines that contain Output are displayed.

show etherchannel [channel-group-number {detail | port | port-channel | protocol | summary}]

{detail | load-balance | port | port-channel | protocol | summary} [ | {begin | exclude |

include} expression]

(Optional) Number of the channel group. The range is 1 to 48.

Display detailed EtherChannel information.

Display the load-balance or frame-distribution scheme among ports in the

port channel.

Display EtherChannel port information.

Display port-channel information.

Display the protocol that is being used in the EtherChannel.

Display a one-line summary per channel-group.

(Optional) Display begins with the line that matches the expression.

(Optional) Display excludes lines that match the expression.

(Optional) Display includes lines that match the specified expression.

Expression in the output to use as a reference point.

Modification

This command was introduced.

Cisco ME 3400 Ethernet Access Switch Command Reference

show etherchannel