Show Idprom - Cisco ME 3400 Command Reference Manual

Ethernet access switch

Hide thumbs Also See for ME 3400:

Table of Contents

show idprom

Use the show idprom user EXEC command to display the IDPROM information for a Gigabit Ethernet

Syntax Description

interface interface-id

Command Modes

Command History

Usage Guidelines

This command applies only to Gigabit Ethernet interfaces and displays information about SFPs inserted

in the SFP module slot.

Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output

do not appear, but the lines that contain Output appear.

This is an example of output from the show idprom interface command for a Gigabit Ethernet interface:

Switch# show idprom interface gigabitethernet0/1

General SFP Information

-----------------------------------------------

Vendor Part Number

Vendor Revision

Vendor Serial Number

-----------------------------------------------

Cisco ME 3400 Ethernet Access Switch Command Reference

show idprom {interface interface-id} [detail] [ | {begin | exclude | include} expression]

Display the IDPROM information for the specified Gigabit Ethernet

(Optional) Display detailed IDPROM information.

(Optional) Display begins with the line that matches the expression.

(Optional) Display excludes lines that match the expression.

(Optional) Display includes lines that match the specified expression.

Expression in the output to use as a reference point.

Modification

This command was introduced.

0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00

OD-BP1511-23SL2

0x30 0x30 0x30 0x31

Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands