Show Idprom - Cisco catalyst 3750 Command Reference Manual
Hide thumbs
Also See for catalyst 3750:
- Software configuration manual (926 pages) ,
- Command reference manual (854 pages) ,
- Hardware installation manual (231 pages)
Table of Contents
Advertisement
show idprom
show idprom
Use the show idprom user EXEC command to display the IDPROM information for the specified
interface.
Syntax Description
interface interface-id
detail
| begin
| exclude
| include
expression
Command Modes
User EXEC
Command History
Release
12.2(20)SE1
Usage Guidelines
This command applies only to 10-Gigabit Ethernet interfaces.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples
This is an example of output from the show idprom interface tengigabitethernet1/0/1 command for
the 10-Gigabit Ethernet interface. It shows the XENPAK module serial EEPROM contents.
For information about the EEPROM map and the field descriptions for the display, see the XENPAK
multisource agreement (MSA) at these sites:
http://www.xenpak.org/MSA/XENPAK_MSA_R2.1.pdf
http://www.xenpak.org/MSA/XENPAK_MSA_R3.0.pdf
Catalyst 3750 Switch Command Reference
2-562
show idprom {interface interface-id} [detail] [ | {begin | exclude | include} expression]
Display the IDPROM information for the specified 10-Gigabit Ethernet
interface.
(Optional) Display detailed hexidecimal IDPROM information.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
OL-8552-07
- Quick Links:
- Cli Command Modes
Hide quick links:
Advertisement
Chapters
Table of Contents
