Debug Lldp Packets - Cisco catalyst 3750 Command Reference Manual
Hide thumbs
Also See for catalyst 3750:
- Software configuration manual (926 pages) ,
- Command reference manual (854 pages) ,
- Hardware installation manual (231 pages)
Table of Contents
Advertisement
Appendix B
Catalyst 3750 Switch Debug Commands
debug lldp packets
Use the debug lldp packets privileged EXEC command to enable debugging of Link Layer Discovery
Protocol (LLDP) packets. Use the no form of this command to disable debugging.
Syntax Description
This command has no arguments or keywords.
Defaults
Debugging is disabled.
Command Modes
Privileged EXEC
Command History
Release
12.2(50)SE
Usage Guidelines
The undebug lldp packets command is the same as the no debug lldp packets command.
When you enable debugging, it is enabled only on the stack master. To enable debugging on a stack
member, you can start a session from the stack master by using the session switch-number privileged
EXEC command. Then enter the debug command at the command-line prompt of the stack member. You
also can use the remote command stack-member-number LINE privileged EXEC command on the stack
master switch to enable debugging on a member switch without first starting a session.
Related Commands
Command
show debugging
OL-8552-07
debug lldp packets
no debug lldp packets
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled.
Catalyst 3750 Switch Command Reference
debug lldp packets
B-23
- Quick Links:
- Cli Command Modes
Hide quick links:
Advertisement
Chapters
Table of Contents
