Debug Platform Cisp - Cisco catalyst 3750 Command Reference Manual

Hide thumbs Also See for catalyst 3750:

Table of Contents

debug platform cisp

Use the debug platform cisp global configuration command to enable platform-level debugging of a

switch that has one or more Client Information Signalling Protocol (CISP)-enabled interfaces. Use the

no form of this command to disable debugging.

Syntax Description

initialization

interface-configuration

Debugging is disabled.

Command Modes

Privileged EXEC

Command History

Usage Guidelines

When you enable debugging, it is enabled only on the stack master. To enable debugging on a stack

member, start a session from the stack master by using the session switch-number privileged EXEC

command and enter enter the debug command at the command-line prompt of the stack member. You

also can use the remote command stack-member-number <line> privileged EXEC command on the

stack master switch to enable debugging on a member switch without first starting a session.

Related Commands

dot1x credentials (global

Catalyst 3750 Switch Command Reference

debug platform cisp [initialization | interface-configuration | rpc]

no debug platform cisp [initialization | interface-configuration | rpc]

Modification

This command was introduced.

configuration)profile Configures a profile on a supplicant switch.

Enable debugging of the CISP initialization sequence.

Enable debugging of the CISP configuration.

Enable debugging of the CISP RPC requests.

Enables Client Information Signalling Protocol

Displays CISP information for a specified

Catalyst 3750 Switch Debug Commands

Show Quick Links

Table of Contents