Cisco catalyst 3750 Command Reference Manual page 100

Hide thumbs Also See for catalyst 3750:

Table of Contents

To define packet classification on a physical-port basis, only one match command per class map is

supported. In this situation, the match-all and match-any keywords are equivalent.

Only one access control list (ACL) can be configured in a class map. The ACL can have multiple access

control entries (ACEs).

This example shows how to configure the class map called class1 with one match criterion, which is an

access list called 103:

Switch(config)# access-list 103 permit ip any any dscp 10

Switch(config)# class-map class1

Switch(config-cmap)# match access-group 103

Switch(config-cmap)# exit

This example shows how to delete the class map class1:

Switch(config)# no class-map class1

You can verify your settings by entering the show class-map privileged EXEC command.

Related Commands

match (class-map

configuration)

show class-map

Catalyst 3750 Switch Command Reference

Defines a traffic classification match criteria (through the police,

set, and trust policy-map class configuration commands) for the

specified class-map name.

Defines the match criteria to classify traffic.

Creates or modifies a policy map that can be attached to multiple

ports to specify a service policy.

Displays QoS class maps.

Catalyst 3750 Switch Cisco IOS Commands

Show Quick Links

Chapters

Table of Contents