Cisco catalyst 3750 Command Reference Manual page 94

Hide thumbs Also See for catalyst 3750:

Table of Contents

channel-group

This example shows how to configure a cross-stack EtherChannel. It uses LACP passive mode and

assigns two ports on stack member 2 and one port on stack member 3 as static-access ports in VLAN 10

to channel 5:

Switch# configure terminal

Switch(config)# interface range gigabitethernet2/0/4 -5

Switch(config-if-range)# switchport mode access

Switch(config-if-range)# switchport access vlan 10

Switch(config-if-range)# channel-group 5 mode passive

Switch(config-if-range)# exit

Switch(config)# interface gigabitethernet3/0/3

Switch(config-if)# switchport mode access

Switch(config-if)# switchport access vlan 10

Switch(config-if)# channel-group 5 mode passive

Switch(config-if)# exit

You can verify your settings by entering the show running-config privileged EXEC command.

Related Commands

channel-protocol

interface port-channel

show etherchannel

show running-config

Catalyst 3750 Switch Command Reference

Restricts the protocol used on a port to manage channeling.

Accesses or creates the port channel.

Displays EtherChannel information for a channel.

Displays LACP channel-group information.

Displays PAgP channel-group information.

Displays the current operating configuration. For syntax

information, select Cisco IOS Configuration Fundamentals

Command Reference, Release 12.2 > File Management

Commands > Configuration File Management Commands.

Catalyst 3750 Switch Cisco IOS Commands

Show Quick Links

Chapters

Table of Contents