Cisco catalyst 3750 Command Reference Manual page 38
Hide thumbs
Also See for catalyst 3750:
- Software configuration manual (926 pages) ,
- Command reference manual (854 pages) ,
- Hardware installation manual (231 pages)
Table of Contents
Advertisement
archive copy-sw
archive copy-sw
Use the archive copy-sw privileged EXEC command on the stack master to copy the running image
from the flash memory on one stack member to the flash memory on one or more other members.
Syntax Description
/destination-system
destination-stack-
member-number
/force-reload
/leave-old-sw
/no-set-boot
/overwrite
/reload
/safe
source-stack-member-
number
Command Modes
Privileged EXEC
Command History
Release
12.1(11)AX
Usage Guidelines
The current software image is not overwritten with the copied image.
Both the software image and HTML files are copied.
The new image is copied to the flash: file system.
The BOOT environment variable is changed to point to the new software image on the flash: file system.
Image names are case sensitive; the image file is provided in tar format.
Note
To successfully use the archive copy-sw privileged EXEC command, you must have downloaded from
a TFTP server the images for both the member switch being added and the master. You use the archive
download-sw privileged EXEC command to perform the download.
Catalyst 3750 Switch Command Reference
2-8
archive copy-sw [/destination-system destination-stack-member-number] [/force-reload]
[leave-old-sw] [/no-set-boot] [/overwrite] [/reload] [/safe] source-stack-member-number
(Optional) The number of the member to which to copy the running image.
The range is 1 to 9.
(Optional) Unconditionally force a system reload after successfully
downloading the software image.
(Optional) Keep the old software version after a successful download.
(Optional) Do not alter the setting of the BOOT environment variable to
point to the new software image after it is successfully downloaded.
(Optional) Overwrite the software image in flash memory with the
downloaded one.
(Optional) Reload the system after downloading the image unless the
configuration has been changed and not been saved.
(Optional) Keep the current software image; do not delete it to make room
for the new software image before the new image is downloaded. The current
image is deleted after the download.
The number of the member from which to copy the running image. The range
is 1 to 9.
Modification
This command was introduced.
Chapter 2
Catalyst 3750 Switch Cisco IOS Commands
OL-8552-07
- Quick Links:
- Cli Command Modes
Hide quick links:
Advertisement
Chapters
Table of Contents
