authentication event
authentication event
Use the authentication event interface configuration command to set the actions for specific
authentication events on the port.
Syntax Description
action
alive
authorize
dead
fail
next-method
no-response
reinitialize
retry
retry count
server
vlan
vlan-id
Defaults
No event responses are configured on the port.
Command Modes
Interface configuration
Command History
Release
12.2(50)SE
Usage Guidelines
Use this command with the fail, no-response, or event keywords to configure the switch response for a
specific action.
Catalyst 3750 Switch Command Reference
2-24
authentication event fail {[action [authorize vlan vlan-id | next-method] {| retry {retry
count}]} { no-response action authorize vlan vlan-id} {server {alive action reinitialize} |
{dead action authorize}}
no authentication event fail {[action[authorize vlan vlan-id | next-method] {| retry {retry
count}]} {no-response action authorize vlan vlan-id} {server {alive action reinitialize} |
{dead action authorize}}
Configure the required action for an authentication event.
Configure the authentication, authorization, and accounting (AAA) server
alive actions.
Authorize the port.
Configure the AAA server dead actions.
Configure the failed-authentication parameters.
Move to next authentication method.
Configure the non-responsive host actions.
Reinitialize all authorized clients
Enable retry attempts after a failed authentication.
Number of retry attempts from 0 to 5.
Configure the actions for AAA server events.
Specify the authentication-fail VLAN from 1 to 4094.
VLAN ID number from 1 to 4094.
Modification
This command was introduced.
Chapter 2
Catalyst 3750 Switch Cisco IOS Commands
OL-8552-07