Cisco catalyst 3750 Command Reference Manual page 98

Hide thumbs Also See for catalyst 3750:

Table of Contents

This example shows how to create a policy map called policy1. When attached to the ingress direction,

it matches all the incoming traffic defined in class1, sets the IP Differentiated Services Code Point

(DSCP) to 10, and polices the traffic at an average rate of 1 Mb/s and bursts at 20 KB. Traffic exceeding

the profile is marked down to a DSCP value gotten from the policed-DSCP map and then sent.

Switch(config)# policy-map policy1

Switch(config-pmap)# class class1

Switch(config-pmap-c)# set dscp 10

Switch(config-pmap-c)# police 1000000 20000 exceed-action policed-dscp-transmit

Switch(config-pmap-c)# exit

You can verify your settings by entering the show policy-map privileged EXEC command.

Related Commands

show policy-map

Catalyst 3750 Switch Command Reference

Creates a class map to be used for matching packets to the class whose name

you specify.

Defines a policer for classified traffic.

Creates or modifies a policy map that can be attached to multiple ports to

specify a service policy.

Classifies IP traffic by setting a DSCP or IP-precedence value in the packet.

Displays quality of service (QoS) policy maps.

Defines a trust state for the traffic classified through the class policy-map

configuration command or the class-map global configuration command.

Catalyst 3750 Switch Cisco IOS Commands

Show Quick Links

Chapters

Table of Contents