Authentication Event - Cisco Catalyst 3560-X Command Reference Manual

Hide thumbs Also See for Catalyst 3560-X:

Table of Contents

authentication event

Syntax Description

Command Modes

Command History

Catalyst 3750-X and 3560-X Switch Command Reference

Downloaded from

www.Manualslib.com

Use the authentication event interface configuration command to set the actions for specific

authentication events on the port.

authentication event {[linksec] fail [action [authorize vlan vlan-id | next-method] {| retry {retry

count}]} { no-response action authorize vlan vlan-id} {server {alive action reinitialize} |

{dead action [authorize | reinitialize vlan vlan-id]}}

Configure the required action for an authentication event.

Configure the authentication, authorization, and accounting (AAA) server

alive actions.

Authorize the port.

Configure the AAA server dead actions.

Configure the failed-authentication parameters.

linksec fail action

Move to next authentication method.

Configure the non-responsive host actions.

reinitialize

Reinitialize all authorized clients

Enable retry attempts after a failed authentication.

Number of retry attempts from 0 to 5.

Configure the actions for AAA server events.

Specify the authentication-fail VLAN from 1 to 4094.

VLAN ID number from 1 to 4094.

No event responses are configured on the port.

Interface configuration

Modification

This command was introduced.

manuals search engine

authentication event linksec fail action

Catalyst 3750-X and 3560-X Switch Cisco IOS Commands

Catalyst 3750-x