Queue-Set - Cisco Catalyst 3560-X Command Reference Manual
Hide thumbs
Also See for Catalyst 3560-X:
- Software configuration manual (1538 pages) ,
- Command reference manual (1244 pages) ,
- Manual (276 pages)
Table of Contents
Advertisement
Chapter 2
Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
queue-set
Syntax Description
Defaults
Command Modes
Command History
Usage Guidelines
Examples
Related Commands
OL-21522-02
Downloaded from
www.Manualslib.com
Use the queue-set interface configuration command on the switch stack or on a standalone switch to map
a port to a queue-set. Use the no form of this command to return to the default setting.
queue-set qset-id
no queue-set qset-id
qset-id
ID of the queue-set. Each port belongs to a queue-set, which defines all the
characteristics of the four egress queues per port. The range is 1 to 2.
The queue-set ID is 1.
Interface configuration
Release
12.2(53)SE2
For information about automatic generation of the queue-set ID with the auto qos voip command, see
the "Usage Guidelines" section for the
This example shows how to map a port to queue-set 2:
Switch(config)# interface gigabitethernet2/0/1
Switch(config-if)# queue-set 2
You can verify your settings by entering the show mls qos interface [interface-id] buffers privileged
EXEC command.
Command
mls qos queue-set output buffers
mls qos queue-set output threshold
show mls qos interface
buffers
manuals search engine
Modification
This command was introduced.
auto qos voip
Description
Allocates buffers to a queue-set.
Configures the weighted tail-drop (WTD) thresholds,
guarantees the availability of buffers, and configures the
maximum memory allocation to a queue-set.
Displays quality of service (QoS) information.
Catalyst 3750-X and 3560-X Switch Command Reference
command.
queue-set
2-471
Advertisement
Table of Contents
