System Env Temperature Threshold Yellow - Cisco Catalyst 3560-X Command Reference Manual

Hide thumbs Also See for Catalyst 3560-X:

Table of Contents

system env temperature threshold yellow

Syntax Description

Command Modes

Command History

Usage Guidelines

Catalyst 3750-X and 3560-X Switch Command Reference

Downloaded from

www.Manualslib.com

Use the system env temperature threshold yellow global configuration command on the switch stack

or on a standalone switch to configure the difference between the yellow and red temperature thresholds

that determines the value of yellow threshold. Use the no form of this command to return to the default

system env temperature threshold yellow value

no system env temperature threshold yellow value

Specify the difference between the yellow and red threshold values (in Celsius). The

range is 10 to 25. The default value is 14.

These are the default values:

Default Values for the Temperature Thresholds

Catalyst 3750-X and Catalyst 3560-X

1. You cannot configure the red temperature threshold.

Global configuration

You cannot configure the green and red thresholds but can configure the yellow threshold. Use the

system env temperature threshold yellow value global configuration command to specify the

difference between the yellow and red thresholds and to configure the yellow threshold. For example, if

the red threshold is 60 degrees C and you want to configure the yellow threshold as 51 degrees C, set the

difference between the thresholds as 15 by using the system env temperature threshold yellow 9

The internal temperature sensor in the switch measures the internal system temperature and might vary

±5 degrees C.

manuals search engine

Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands

between Yellow

Modification

This command was introduced.

Catalyst 3750-x