Vtp Primary - Cisco Catalyst 3560-X Command Reference Manual

Hide thumbs Also See for Catalyst 3560-X:

Table of Contents

Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands

vtp primary

Syntax Description

Command Modes

Command History

Usage Guidelines

Downloaded from

www.Manualslib.com

Use the vtp primary privileged EXEC command to configure a switch as the VLAN Trunking Protocol

(VTP) primary server.

vtp primary [mst | vlan] [force]

There is no no form of the command.

This command is supported only when the switch is running VTP version 3.

Although visible in the command line help, the vtp {password password | pruning | version number}

commands are not supported.

The switch is a VTP secondary server.

Privileged EXEC

This command is supported only on switches configured for VTP version 3.

A VTP primary server updates the database information and sends updates that are honored by all

devices in the system. A VTP secondary server can only back up the updated VTP configurations

received from the primary server to NVRAM.

By default, all devices come up as secondary servers. Primary server status is needed only for database

updates when the administrator issues a takeover message in the domain. You can have a working VTP

domain without any primary servers.

Primary server status is lost if the device reloads or domain parameters change.

manuals search engine

(Optional) Configure the switch as the primary VTP server for the multiple

spanning tree (MST) feature.

(Optional) Configure the switch as the primary VTP server for VLANs .

(Optional) Configure the switch to not check for conflicting devices when

configuring the primary server.

Modification

This command was introduced.

Catalyst 3750-X and 3560-X Switch Command Reference

Catalyst 3750-x