Shutdown Vlan - Cisco Catalyst 3560-X Command Reference Manual
Hide thumbs
Also See for Catalyst 3560-X:
- Software configuration manual (1538 pages) ,
- Command reference manual (1244 pages) ,
- Manual (276 pages)
Table of Contents
Advertisement
shutdown vlan
shutdown vlan
Syntax Description
Defaults
Command Modes
Command History
Usage Guidelines
Examples
Related Commands
Catalyst 3750-X and 3560-X Switch Command Reference
2-784
Downloaded from
www.Manualslib.com
Use the shutdown vlan global configuration command on the switch stack or on a standalone switch to
shut down (suspend) local traffic on the specified VLAN. Use the no form of this command to restart
local traffic on the VLAN.
shutdown vlan vlan-id
no shutdown vlan vlan-id
vlan-id
ID of the VLAN to be locally shut down. The range is 2 to 1001. VLANs defined as
default VLANs under the VLAN Trunking Protocol (VTP), as well as
extended-range VLANs (greater than 1005) cannot be shut down. The default
VLANs are 1 and 1002 to 1005.
No default is defined.
Global configuration
Release
Modification
12.2(53)SE2
This command was introduced.
The shutdown vlan command does not change the VLAN information in the VTP database. The
command shuts down local traffic, but the switch still advertises VTP information.
This example shows how to shut down traffic on VLAN 2:
Switch(config)# shutdown vlan 2
You can verify your setting by entering the show vlan privileged EXEC command.
Command
Description
shutdown
Shuts down local traffic on the VLAN when in config-VLAN mode (accessed
(config-vlan mode)
by the vlan vlan-id global configuration command).
manuals search engine
Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands
OL-21522-02
Advertisement
Table of Contents
