Cisco Catalyst 3560-X Command Reference Manual page 344

Hide thumbs Also See for Catalyst 3560-X:

Table of Contents

ipv6 mld snooping vlan

Related Commands

Catalyst 3750-X and 3560-X Switch Command Reference

Downloaded from

www.Manualslib.com

The configuration and the static ports and groups are saved in NVRAM.

When the IPv6 multicast router is a Catalyst 6500 switch and you are using extended VLANs (in the

range 1006 to 4094), IPv6 MLD snooping must be enabled on the extended VLAN on the Catalyst 6500

switch in order for the Catalyst 3750-X or Catalyst 3560-X switch to receive queries on the VLAN. For

normal-range VLANs (1 to 1005), it is not necessary to enable IPv6 MLD snooping on the VLAN on the

Catalyst 6500 switch.

VLAN numbers 1002 through 1005 are reserved for Token Ring and FDDI VLANs and cannot be used

in MLD snooping.

This example shows how to enable MLD Immediate-Leave processing on VLAN 1:

Switch(config)# ipv6 mld snooping vlan 1 immediate-leave

This example shows how to disable MLD Immediate-Leave processing on VLAN 1:

Switch(config)# no ipv6 mld snooping vlan 1 immediate-leave

This example shows how to configure a port as a multicast router port:

Switch(config)# ipv6 mld snooping vlan 1 mrouter interface gigabitethernet1/0/2

This example shows how to configure a static multicast group:

Switch(config)# ipv6 mld snooping vlan 2 static FF12::34 interface gigabitethernet1/0/2

You can verify your settings by entering the show ipv6 mld snooping vlan vlan-id user EXEC

ipv6 mld snooping

ipv6 mld snooping vlan

dual-ipv4-and-ipv6

show ipv6 mld snooping

manuals search engine

Catalyst 3750-X and 3560-X Switch Cisco IOS Commands

Enables IPv6 MLD snooping.

Configures IPv6 MLD snooping on the VLAN.

Configures an SDM template to support IPv6

Displays IPv6 MLD snooping configuration.

Catalyst 3750-x