Ipv6 Traffic-Filter - Cisco Catalyst 3560-X Command Reference Manual
Hide thumbs
Also See for Catalyst 3560-X:
- Software configuration manual (1538 pages) ,
- Command reference manual (1244 pages) ,
- Manual (276 pages)
Table of Contents
Advertisement
Chapter 2
Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
ipv6 traffic-filter
Note
Syntax Description
Defaults
Command Modes
Command History
Usage Guidelines
OL-21522-02
Downloaded from
www.Manualslib.com
Use the ipv6 traffic-filter interface configuration command on the switch stack or on a standalone
switch to filter IPv6 traffic on an interface. The type and direction of traffic that you can filter depends
on the feature set running on the switch stack. Use the no form of this command to disable the filtering
of IPv6 traffic on an interface.
ipv6 traffic-filter access-list-name {in | out}
no ipv6 traffic-filter access-list-name {in | out}
This command is available only if you have configured a dual IPv4 and IPv6 Switch Database
Management (SDM) template on the switch. The command is not supported on switches running the
LAN base feature set.
access-list-name
in
out
Filtering of IPv6 traffic on an interface is not configured.
Interface configuration
Release
12.2(53)SE2
To configure the dual IPv4 and IPv6 template, enter the sdm prefer dual-ipv4-and-ipv6 {default | vlan)
global configuration command and reload the switch.
You can use the ipv6 traffic-filter command on physical interfaces (Layer 2 or Layer 3 ports), Layer 3
port channels, or switch virtual interfaces (SVIs).
You can apply an ACL to outbound or inbound traffic on Layer 3 interfaces (port ACLs), or to inbound
traffic on Layer 2 interfaces (router ACLs).
If any port ACL (IPv4, IPv6, or MAC) is applied to an interface, that port ACL is used to filter packets,
and any router ACLs attached to the SVI of the port VLAN are ignored.
manuals search engine
Specify an IPv6 access name.
Specify incoming IPv6 traffic.
Specify outgoing IPv6 traffic.
The out keyword is not supported for Layer 2 interfaces (port
Note
ACLs).
Modification
This command was introduced.
Catalyst 3750-X and 3560-X Switch Command Reference
ipv6 traffic-filter
2-313
Advertisement
Table of Contents
