Mac Sec - Cisco Catalyst 3560-X Command Reference Manual
Hide thumbs
Also See for Catalyst 3560-X:
- Software configuration manual (1538 pages) ,
- Command reference manual (1244 pages) ,
- Manual (276 pages)
Table of Contents
Advertisement
mac sec
mac sec
Syntax Description
Defaults
Command Modes
Command History
Usage Guidelines
Examples
Related Commands
Catalyst 3750-X and 3560-X Switch Command Reference
2-350
Downloaded from
www.Manualslib.com
To enable 802.1ae Media Access Control Security (MACsec) on an interface, use the macsec interface
configuration command. To disable MACsec on the interface, use the no form of this command.
macsec
no macsec
This command has no arguments or keywords.
MACsec is disabled.
Interface configuration
Release
Modification
12.2(53)SE2
This command was introduced.
The interface must be in switchport access mode to see this command.
Entering the macsec interface configuration command puts the interface in the MACsec mode.
This example configures MACsec on an interface:
Switch(config)# interface GigabitEthernet1/0/25
Switch(config-if)# switchport access vlan 10
Switch(config-if)# switchport mode access
Switch(config-if)# macsec
Switch(config-if)# authentication event linksec fail action authorize vlan 2
Switch(config-if)# authentication host-mode multi-domain
Switch(config-if)# authentication linksec policy must-secure
Switch(config-if)# authentication port-control auto
Switch(config-if)# authentication violation protect
Switch(config-if)# mka policy replay-policy
Switch(config-if)# dot1x pae authenticator
Switch(config-if)# spanning-tree portfast
Switch(config-if)# end
You can verify your setting by entering the show macsec summary privileged EXEC command.
Command
show macsec interface
interface-id
show macsec summary
manuals search engine
Chapter 2
Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
Description
Displays MACsec status and statistics for the specified interface.
Displays switch MACsec configuration.
OL-21522-02
Advertisement
Table of Contents
