Cisco Catalyst 3560-X Command Reference Manual page 872

Hide thumbs Also See for Catalyst 3560-X:

Table of Contents

spanning-tree uplinkfast

Related Commands

Catalyst 3750-X and 3560-X Switch Command Reference

Downloaded from

www.Manualslib.com

Do not enable the root guard on interfaces that will be used by the UplinkFast feature. With UplinkFast,

the backup interfaces (in the blocked state) replace the root port in the case of a failure. However, if root

guard is also enabled, all the backup interfaces used by the UplinkFast feature are placed in the

root-inconsistent state (blocked) and prevented from reaching the forwarding state.

If you set the max-update-rate to 0, station-learning frames are not generated, so the spanning-tree

topology converges more slowly after a loss of connectivity.

This example shows how to enable UplinkFast:

Switch(config)# spanning-tree uplinkfast

You can verify your setting by entering the show spanning-tree summary privileged EXEC command.

show spanning-tree

spanning-tree vlan

root primary

manuals search engine

Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands

Displays a summary of the spanning-tree interface states.

Forces this switch to be the root switch.

Catalyst 3750-x