Vlan Filter - Cisco Catalyst 3560-X Command Reference Manual

Hide thumbs Also See for Catalyst 3560-X:

Table of Contents

vlan filter

Syntax Description

Command Modes

Command History

Usage Guidelines

Catalyst 3750-X and 3560-X Switch Command Reference

Downloaded from

www.Manualslib.com

Use the vlan filter global configuration command on the switch stack or on a standalone switch to apply

a VLAN map to one or more VLANs. Use the no form of this command to remove the map.

vlan filter mapname vlan-list {list | all}

no vlan filter mapname vlan-list {list | all}

This command is not supported on switches running the LAN base feature set.

Name of the VLAN map entry.

The list of one or more VLANs in the form tt, uu-vv, xx, yy-zz, where spaces

around commas and dashes are optional. The range is 1 to 4094.

Remove the filter from all VLANs.

There are no VLAN filters.

Global configuration

Modification

This command was introduced.

To avoid accidentally dropping too many packets and disabling connectivity in the middle of the

configuration process, we recommend that you completely define the VLAN access map before applying

it to a VLAN.

For more information about VLAN map entries, see the software configuration guide for this release.

This example applies VLAN map entry map1 to VLANs 20 and 30:

Switch(config)# vlan filter map1 vlan-list 20, 30

This example shows how to delete VLAN map entry mac1 from VLAN 20:

Switch(config)# no vlan filter map1 vlan-list 20

You can verify your settings by entering the show vlan filter privileged EXEC command.

manuals search engine

Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands

Catalyst 3750-x