Shutdown Vlan - Cisco Catalyst 2950 Command Reference Manual
Desktop switch
Hide thumbs
Also See for Catalyst 2950:
- Configuration manual (710 pages) ,
- Command reference manual (686 pages) ,
- Software configuration manual (674 pages)
Table of Contents
Advertisement
shutdown vlan
shutdown vlan
Use the shutdown vlan global configuration command to shut down (suspend) local traffic on the
specified VLAN. Use the no form of this command to restart local traffic on the VLAN.
Syntax Description
vlan-id
Defaults
No default is defined.
Command Modes
Global configuration
Command History
Release
12.0(5.2)WC(1)
Usage Guidelines
The shutdown vlan command does not change the VLAN information in the VTP database. It shuts
down traffic locally, but the switch still advertises VTP information.
Examples
This example shows how to shutdown traffic on VLAN 2:
Switch(config)# shutdown vlan 2
You can verify your setting by entering the show vlan privileged EXEC command.
Related Commands
Command
shutdown
(config-vlan mode)
vlan (global
configuration)
vlan database
Catalyst 2950 Desktop Switch Command Reference
2-234
shutdown vlan vlan-id
no shutdown vlan vlan-id
ID of the VLAN to be locally shut down. Valid IDs are from 2 to 1001. VLANs
defined as default VLANs under the VLAN Trunking Protocol (VTP), as well as
extended-range VLANs (greater than 1005) cannot be shut down. The default
VLANs are 1 and 1002 to 1005. Do not enter leading zeros.
Modification
This command was first introduced.
Description
Shuts down local traffic on the VLAN when in config-VLAN mode (accessed by the
vlan vlan-id global configuration command).
Enables config-vlan mode.
Enters VLAN configuration mode.
Chapter 2 Cisco IOS Commands
78-11381-05
Hide quick links:
Advertisement
Table of Contents
