Cisco ME 3400 Command Reference Manual page 98

Ethernet access switch

Hide thumbs Also See for ME 3400:

Table of Contents

cpu traffic qos precedence

switch(config)# interface g1/0/1

switch(config-if)# service-policy output output-policy

switch(config-if)# exit

Related Commands

cpu traffic qos cos

cpu traffic qos dscp

cpu traffic qos

show cpu traffic qos

show policy-map

show running-config

show table-map

Cisco ME 3400 Ethernet Access Switch Command Reference

Configures a class map to be used for matching packets to a specified criteria

and enters class-map configuration mode.

Configures class of service (CoS) marking for control plane traffic.

Configures quality of service (QoS) marking based on DSCP for control

plane traffic.

Maps all CPU-generated traffic to a single class in the output policy-maps

without changing the class of service (CoS), IP differentiated services code

point (DSCP), or IP-precedence packet markings.

Configures a policy map that can be attached to multiple physical ports and

enters policy-map configuration mode.

Displays the QoS markings configured for CPU traffic.

Displays QoS policy map information for the specified policy map name,

interface, input or output policy maps, or policy-map class.

Displays the configured class maps, policy maps, table maps, and aggregate

Displays information for all configured table maps or the specified table

Configures quality of service (QoS) mapping and enters table-map

configuration mode.

Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands