Show Policer Aggregate - Cisco ME 3400 Command Reference Manual
Ethernet access switch
Hide thumbs
Also See for ME 3400:
- Software configuration manual (1138 pages) ,
- Command reference manual (872 pages) ,
- Hardware installation manual (88 pages)
Table of Contents
Advertisement
Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
show policer aggregate
Use the show policer aggregate user EXEC command to display quality of service (QoS) aggregate
policer information for all aggregate policers or a specific policer.
Syntax Description
aggregate-policer-
name
| begin
| exclude
| include
expression
Command Modes
User EXEC
Command History
Release
12.2(25)EX
Usage Guidelines
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
Examples
This is an example of output from the show policer aggregate command:
Switch> show policer aggregate my-policer
aggregate-policer: my-policer
In use by policymap: pin
Related Commands
Command
police aggregate (policy-map class
configuration)
policer aggregate (global
configuration)
OL-9640-10
show policer aggregate [aggregate-policer-name] [ | {begin | exclude | include} expression]
(Optional) The name of the aggregate policer.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
police cir 12000000 bc 5000
conform-action transmit
exceed-action set-cos-transmit cos table 67577
Description
Applies an aggregate policer to multiple classes in the same
policy map.
Creates an aggregate policer to police all traffic received on an
interface.
Cisco ME 3400 Ethernet Access Switch Command Reference
show policer aggregate
2-549
Advertisement
Table of Contents
