Cisco Catalyst 2960-X Command Reference Manual page 67
Layer 2
Hide thumbs
Also See for Catalyst 2960-X:
- Security configuration manual (498 pages) ,
- Hardware installation manual (34 pages) ,
- Getting started manual (25 pages)
Table of Contents
Advertisement
Layer 2 Commands
Field
Port State
This is an example of output from the show lacp neighbor command:
Switch> show lacp neighbor
Flags: S - Device is sending Slow LACPDUs
Channel group 3 neighbors
Partner's information:
Port
Gi2/0/1
Partner's information:
Port
Gi2/0/2
This is an example of output from the show lacp sys-id command:
Switch> show lacp sys-id
32765,0002.4b29.3a00
The system identification is made up of the system priority and the system MAC address. The first two bytes
are the system priority, and the last six bytes are the globally administered individual MAC address associated
to the system.
OL-29043 -01
A - Device is in Active mode
Partner
System ID
32768,0007.eb49.5e80
LACP Partner
Port Priority
32768
Partner
System ID
32768,0007.eb49.5e80
LACP Partner
Port Priority
32768
Catalyst 2960-X Switch Layer 2 Command Reference, Cisco IOS Release 15.0(2)EX
Description
State variables for the port, encoded as individual bits
within a single octet with these meanings:
• bit0: LACP_Activity
• bit1: LACP_Timeout
• bit2: Aggregation
• bit3: Synchronization
• bit4: Collecting
• bit5: Distributing
• bit6: Defaulted
• bit7: Expired
In the list above, bit7 is the MSB and bit0 is
Note
the LSB.
F - Device is sending Fast LACPDUs
P - Device is in Passive mode
Partner
Partner
Port Number
Age
Flags
0xC
19s
SP
Partner
Partner
Oper Key
Port State
0x3
0x3C
Partner
Partner
Port Number
Age
Flags
0xD
15s
SP
Partner
Partner
Oper Key
Port State
0x3
0x3C
show lacp
61
- Quick Links:
- Layer 2 Commands
Hide quick links:
Advertisement
Table of Contents
